|
09/22/2017, 06:55 PM | #1 |
Registered Member
Join Date: Mar 2006
Location: Ottawa, Canada
Posts: 101
|
ATK issues
I have the ATK connected to my classic.
It's not running when the water level drops. Initially I had it set up as a stand alone, and it worked perfectly. Now that it's connected to the classic, it's just not working. I've updated the module, and tried unplugging it to reset it a few times. I can use the slider switches on fusion to activate it manually, but it won't run on its own. Ideas? |
09/22/2017, 06:56 PM | #2 |
Registered Member
Join Date: Mar 2006
Location: Ottawa, Canada
Posts: 101
|
Here's the profile:
Fallback OFF Set OFF If Swx7_1 OPEN Then ON If Swx7_2 CLOSED Then OFF When On > 005:00 Then OFF Defer 000:10 Then ON Defer 000:04 Then OFF Min Time 060:00 Then OFF |
09/22/2017, 09:26 PM | #3 |
Registered Member
Join Date: Apr 2013
Posts: 193
|
The Min time tells the PMUP not to turn back on for 60 minutes
Have you waited that long after the lower optical sensor showed OPEN? |
09/22/2017, 09:41 PM | #4 |
Registered Member
Join Date: Mar 2006
Location: Ottawa, Canada
Posts: 101
|
Do that mean. I have to wait the 60 min before unplugging and resetting it?
|
|
|