|
11/08/2018, 10:23 PM | #1 |
Registered Member
Join Date: Aug 2018
Posts: 68
|
Filtration options for Fluval EVO
I apologize if this has been asked a million times before. I did a search and didn't find an answer, so figured I would ask.
What do people upgrade their filtration to? Or do people not really upgrade the filtration. I'm still new to saltwater, so I'm not sure if its different. In freshwater it seems there is no such thing as too much filtration! My tank is in my office, so I can't have anything super loud. I have the Eheim 2217s on my 125g and I know how to operate them and feel comfortable with them. I was looking at maybe adding a small canister filter. I wanted to ask before purchasing anything though. If the current filtration is fine then I'll just leave it as is. All levels look good btw. There are 2 clowns, 1 bicolor blenny, 2 peppermint shrimp and 1 tuxedo urchin. Thanks! |
11/09/2018, 02:49 PM | #2 |
Registered Member
Join Date: Nov 2013
Location: Novi, MI
Posts: 135
|
I have a media basket in chamber one..... running filter floss, chemipure blue, and purigen.
Chamber 2 - I plugged the hole which improved flow and I made it into a mini refugium with chaeto. Chamber 3 is my heater and pump. Tank is about a year old and have never had any green algae not even a spot. Whatever you do, I highly recommend a media basket like this: https://intankaquatics.com/fluval-ev...edia-basket-1/ Absolutely no need for a canister filter or any other extra filtration. No skimmer needed either.... just large regular water changes and you'll be good! Good luck! |
11/09/2018, 06:12 PM | #3 | |
Registered Member
Join Date: Aug 2018
Posts: 68
|
Quote:
I envy you and your no algae haha. One of the reasons I was thinking of upping my filtration is because of all the algae. Its kind of frustrating since all my water parameters seem good. |
|
11/10/2018, 05:43 AM | #4 |
Registered Member
Join Date: Dec 2008
Location: Wesley Chapel FL
Posts: 751
|
Your parameters look good because the algae is consuming it and your test results (hope you invested in quality test gear) are only telling you what is left on the plate so to speak. I have also had great success using the center chamber to grow hair algae. Cheato turned out to be a problem keeping it totoally contained within the chamber. Step up your eater changes and reduce into of pollutants. Good luck
__________________
Jimbo 13.5G EVO |
11/11/2018, 09:31 AM | #5 |
Registered Member
Join Date: Apr 2013
Location: Naperville, IL
Posts: 546
|
I have the spec 16 (same as Evo 13 except 2 inches taller) and had spec 5 for years. I didn't upgrade my filter section with media baskets. I did upgrade the return pumps to move more water. In my view, live rock in the display is all you need for the nitrogen cycle. So I view the back chambers for mechanical and chemical filtration. I've found a big chunk of sponge catches lots of particulates and keep the display clear. I also use a skimmer to reduce WC to once a month. And I use carbon and phosphate reducing filter pads that I replace monthly. My filter sponge takes up about half of the space of one of my back chamber. I pull that out every 2 weeks and rinse that out using my bigger tank's salt water. I'm amazed at how much crap is caught by the sponge. When I look at the small piece of sponge used in the above referenced media basket, I just don't think that's enough. Just my 2¢
|
11/13/2018, 05:36 PM | #6 | |
Registered Member
Join Date: Aug 2018
Posts: 68
|
Quote:
I went to my LFS and they said it was not necessary for what I was running to change filtration unless I really wanted to. I did have an old powerhead though that I installed to help with eliminating any dead spots and hopefully keep things moving better! |
|
11/13/2018, 09:45 PM | #7 |
Registered Member
Join Date: Apr 2013
Location: Naperville, IL
Posts: 546
|
I upgraded my return pump to the Aquatop NP-305. It was only $27.
|
11/14/2018, 08:53 AM | #8 | |
Registered Member
Join Date: Aug 2018
Posts: 68
|
Quote:
So you just stuffed a sponge/mechanical filtration in chamber 1 where the skimmer is supposedly supposed to go? Did you plug the hole in the bottom middle section of chamber 2 as well? I've seen videos and pics of people doing that online who say it helps increase flow. |
|
11/15/2018, 12:09 AM | #9 | |
Registered Member
Join Date: Apr 2013
Location: Naperville, IL
Posts: 546
|
Quote:
If you don't want the skimmer, yeah I would put a sponge in the top half of both chamber 1 and 2. I would put chemical media under the sponges. You won't need a big heater so you can put additional chemical media in the return chamber too. |
|
|
|