Soulpatch's 150 SC build - Page 29

mav3rick478 · 02/07/2017, 12:41 PM

Hahaha sucker, actually in my daughter's room is a desktop tank with 2 brackish puffers that guess who gets to feed every night ✋

Sent from my Pixel XL using Tapatalk

soulpatch · 02/07/2017, 01:08 PM

Yeah I have been taking care of the guppy tank thus far. Is what it is I guess. But my trip to the pet store for 80 worth of salt turned into $200 and a tank I hate to look at. I actually wish they had gotten the hamster instead as at least then I could watch it roll around on the floor messing with my dogs.

Nonetheless whatever makes the women happy...

So while I am moving horribly slow the newest project is coming along.

soulpatch · 02/08/2017, 08:14 PM

Well threw a thin layer of paint on the box last night to highlight the wood imperfections. Wood filler was used tonight to fill most of them and then I will sand tomorrow and reshoot some paint on her. Well maybe not tomorrow since we are supposed to get 6-10 inches of snow but hopefully before the weekend. I would like to use Sunday to actually move the wiring over to this...

soulpatch · 02/12/2017, 07:50 PM

Good ole PA. THis past week we had record highs followed by a snow storm and now a mix of rain and cold. So no painting of the box for me this weekend to prep it for the final construction. It has been completely sanded though I might have to sand some more once i shoot some paint. Paint has a way of highlighting some imperfections and it will bother me.

So this weekend I decided the tank needed cleaned. I picked at all the ulva algae in the tank and got rid of visible bubble algae best as I could. This was done with a 40 gal water change. When turning the pump back on for the return I had to turn it WAY down to not drain the sump. While cleaning the algae the ulva and such giot to my strainer and blocked it up. So I was full emergency which was why tuning didnt work. SO broke down the overflow and used the time to get the snails, sand, and other stuff out of there.

Cleaned the glass finally and once the tank settles down a bit I will get some new FTS shots then tomorrow get some coral closeups with the DSLR...

soulpatch · 02/12/2017, 08:22 PM

Those are unedited. I will get the dslr out tomorrow night or so and balance the shots so you cak see ehat i see in person

Sent from my SM-G935T using Tapatalk

soulpatch · 02/14/2017, 07:53 PM

Broke out the DSLR and did some processing of the pics today. Here is some eye candy. PLease don't mind the algae issues I am having. The ulva is down considerably and should be more when my magnificent foxface is in there, the bubble algae is going away with upkeep, and the cyano is new though limited...

soulpatch · 02/14/2017, 07:54 PM

soulpatch · 02/19/2017, 10:44 AM

SO they say measure three times for a reason. I finished the shell of the cabinet, got it on the wall, went to flip open the one compartment and realized I did not have the room. The wall space next to the tank is 31" long. The cabinet is 25 inches long but I neglected to account for the swing open portion and the small gap which takes it to 32 1/8 inches wide which is too much. Given that the hinges are on the tank side that wont work to even open it enough for me to get into things as it will rub.

so for now scrapping the idea till Summer when I can come back with full allotment of tools and more time. I will move the ATO container out of the stand this weekend and finally set up the calcium reactor (well start to) tonight or tomorrow. I need to get that going and stabilized as I have some show pieces of SPS I want to pick up. Walt Disney Acro being one....

soulpatch · 02/19/2017, 05:13 PM

OK so the idea might not be scrapped but edited.

I think I will mount the cabinet to the wall directly without the sliders so I dont have to worry about anything behind the tank. Doing so impacts the closet door slightly but I can open it enough and it is a 32" door so rather large.

So at this point I have 2 options as I see it.

Option 1: I put the controllers on the 1/4" MDF I have and the hinges and all the electronics hidden behind the "door" This would probably look the cleanest but it would miss the look of seeing the power bricks and electronics that is kinda cool in its own right.

Option 2: I put some corner brackets in the inner portion and have a false wall sit on them with velcro. I could then recess the "wall" slightly so I could have the EB8s and other apex modules with the controllers and such on the wall with all the wires and power bricks hidden behind it in the back compartment.

Regardless of option I will likely merge a few units onto single plugs with a few power strips so as to free up some plugs in the system now. IE my jabeo PP8 and Skimmer are all on the same settings so no need to have seperate plugs for them all. I am going to have to rewrie some anyway with the calcium reactor needing a few plugs

Thoughts?

Farmreefer · 02/20/2017, 09:45 AM

Quote:

Originally Posted by soulpatch

OK so the idea might not be scrapped but edited.

I think I will mount the cabinet to the wall directly without the sliders so I dont have to worry about anything behind the tank. Doing so impacts the closet door slightly but I can open it enough and it is a 32" door so rather large.

So at this point I have 2 options as I see it.

Option 1: I put the controllers on the 1/4" MDF I have and the hinges and all the electronics hidden behind the "door" This would probably look the cleanest but it would miss the look of seeing the power bricks and electronics that is kinda cool in its own right.

Option 2: I put some corner brackets in the inner portion and have a false wall sit on them with velcro. I could then recess the "wall" slightly so I could have the EB8s and other apex modules with the controllers and such on the wall with all the wires and power bricks hidden behind it in the back compartment.

Regardless of option I will likely merge a few units onto single plugs with a few power strips so as to free up some plugs in the system now. IE my jabeo PP8 and Skimmer are all on the same settings so no need to have seperate plugs for them all. I am going to have to rewrie some anyway with the calcium reactor needing a few plugs

Thoughts?

My thought is this. Do it the way you will enjoy a year from now, even if that means postponing the project. What I admire about your work is the precision and not settling for what will get by.

Sent from my iPhone using Tapatalk

soulpatch · 02/20/2017, 10:20 AM

So while online last night i saw bao is now making biards for controller setups. So i am going to slap the piece if mdf in there recessed and mount to that with electronics showing and see how i like it. If i stick with it then ill order a board from bao and redo the enclosure to match or have him make it for me.

If i dont like it then ill get a cabinet from ikea or such and redo with the closed doors or soemthing. I think this is one i need to build and see to know if i will like it

Sent from my SM-G935T using Tapatalk

texdoc77 · 02/21/2017, 02:10 PM

Been away for a while, but had a quick question. What skimmer are you currently using. I thought you started with a LifeReef, but I thought I saw where you said you were using an Aquamaxx recently. I may be making this stuff up. Looking to upgrade myself...

Thanks, also BTW tanked is now crystal clear, but still having alk issues, you?

SC

soulpatch · 02/21/2017, 02:19 PM

I upgraded to the lifereef when I went from my aquamaxx on the nano. That said if I were to go needle wheel on this tank I would likely get another aquamaxx. For the cost though you are basically in lifereef territory and since they use any pump long term you are better off with lifereef IMO.

Yes still having ALK crap out on me. I think I should haev the calcium reactor up this week so I am hopeful that those issues will be resolved shortly. Other option is to continue to suppliment with alk dosing but I think once the calc reactor is up I should be good. Obviously will take some time to get it dialed in and such though.

I just have to slap this cabinet together (though I will admit once I figured out my botched measurement plans I did not sand enough or put as much polish as I normally would so when I get the BAO panel later I will rebuild or have Ben make me an enclosure up to my standards...) to move my electronics and wire everything up for the calcium reactor...

texdoc77 · 02/21/2017, 04:43 PM

Been watching the cabinet build... I've made those kinds of mistakes all too often. On the LR skimmer did you go with the supplied pump and did you need the short neck?

soulpatch · 02/21/2017, 05:05 PM

he gives rivted necks now so size can be upgraded at any time. I currently have it on a jabeo pump but anything will do so long as it can push some pressure

ReefWreak · 02/22/2017, 03:05 PM

I don't have time to provide feedback in any helpful way right now, but I'm at least glad I took the time to re-thumb-through your thread, as the pics were beautiful and nice and relaxing.

Man do I have growth, but colors.... that's the hard part....

I'm sure on my T5/LED hybrid 300g tank the colors will be easy enough....

(that's a silent compliment on your colors, btw. I'm just awful at expressing myself in stream of consciousness)

soulpatch · 02/22/2017, 05:08 PM

Thanks. I struggle to look backwards in the thread as I had some awesome acans that I have lost over time. Just this week I lost my melenarus wrasse as it went overflow diving after I removed the screen from my one drain temporarily to allow algae and such to get to my mesh socks.

On the plus side I just spent a couple hundred and have the following coming:

CUC refresh
Tail spot blenny
Bartlett anthias trio
Australian harlequin tusk juvi

Get them in on Friday. I took off to set up the electrical box so will be a good time to mess with some fish as well!!!

soulpatch · 02/22/2017, 05:48 PM

Correction the wrasse is still alive. First time since sunday i have seen him but he is swimming. Bit banged up but alive!!!!!!

Sent from my SM-G935T using Tapatalk

soulpatch · 02/23/2017, 08:06 PM

Cabinet hung finally...

In this pic you can see the corner brackets with the velcro on them for the panel to rest on

Here is with panel

Sent from my SM-G935T using Tapatalk

soulpatch · 02/23/2017, 08:07 PM

Now to remove items from tank stand and wire up into the cabinet..

Sent from my SM-G935T using Tapatalk

soulpatch · 02/24/2017, 02:17 PM

Need to do some cleanup yet and reglue one or two of the wire passthroughs but she is up and running...

Things on panel laid out

Wires wires everywhere. Good thing i labeled everything

Finished for niw as i have ti get my calc reactor running and still get to the gym and lfs yet today...

I will clean up some of the rest later and srill might reach out to local glass shop about smoked glass doors

Sent from my SM-G935T using Tapatalk

Farmreefer · 02/24/2017, 04:50 PM

Looks great

Sent from my iPad using Tapatalk

soulpatch · 02/24/2017, 09:19 PM

So in stand my ATO has been moved slightly to afford the needed space for the calcium reactor. I tested the custom regulator I got and had to do a small repair to the solenoid power supply as it was damaged in shipping. But it is up and ready to go now.

Vertex calcium reactor has been filled with media and all the tubing connected.

TOmorrow I need to connect the CO2 to the reactor, hook up the PH controller, and hook up the new Spectrapure feed pump.

I also need to get my fxface tomorrow. Its a good weekend for the reef tank!!!

soulpatch · 02/25/2017, 03:03 PM

Got the fish and the calcium react9r is feeding now via new feedpump...

Sent from my SM-G935T using Tapatalk

soulpatch · 02/25/2017, 03:04 PM

The things are still tight in the stand. I think im back to moving the ato container out of the stand or switching to a solenoid instead of a container...

Sent from my SM-G935T using Tapatalk

02/07/2017, 01:08 PM	#702
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Yeah I have been taking care of the guppy tank thus far. Is what it is I guess. But my trip to the pet store for 80 worth of salt turned into $200 and a tank I hate to look at. I actually wish they had gotten the hamster instead as at least then I could watch it roll around on the floor messing with my dogs. Nonetheless whatever makes the women happy... So while I am moving horribly slow the newest project is coming along. __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/08/2017, 08:14 PM	#703
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Well threw a thin layer of paint on the box last night to highlight the wood imperfections. Wood filler was used tonight to fill most of them and then I will sand tomorrow and reshoot some paint on her. Well maybe not tomorrow since we are supposed to get 6-10 inches of snow but hopefully before the weekend. I would like to use Sunday to actually move the wiring over to this... __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/12/2017, 07:50 PM	#704
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Good ole PA. THis past week we had record highs followed by a snow storm and now a mix of rain and cold. So no painting of the box for me this weekend to prep it for the final construction. It has been completely sanded though I might have to sand some more once i shoot some paint. Paint has a way of highlighting some imperfections and it will bother me. So this weekend I decided the tank needed cleaned. I picked at all the ulva algae in the tank and got rid of visible bubble algae best as I could. This was done with a 40 gal water change. When turning the pump back on for the return I had to turn it WAY down to not drain the sump. While cleaning the algae the ulva and such giot to my strainer and blocked it up. So I was full emergency which was why tuning didnt work. SO broke down the overflow and used the time to get the snails, sand, and other stuff out of there. Cleaned the glass finally and once the tank settles down a bit I will get some new FTS shots then tomorrow get some coral closeups with the DSLR... __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/12/2017, 08:22 PM	#705
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Those are unedited. I will get the dslr out tomorrow night or so and balance the shots so you cak see ehat i see in person Sent from my SM-G935T using Tapatalk __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/14/2017, 07:53 PM	#706
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Broke out the DSLR and did some processing of the pics today. Here is some eye candy. PLease don't mind the algae issues I am having. The ulva is down considerably and should be more when my magnificent foxface is in there, the bubble algae is going away with upkeep, and the cyano is new though limited... __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals. Last edited by soulpatch; 08/09/2017 at 10:50 AM.

02/07/2017, 12:41 PM	#701
mav3rick478 Registered Member Join Date: Mar 2015 Location: California Posts: 888	Hahaha sucker, actually in my daughter's room is a desktop tank with 2 brackish puffers that guess who gets to feed every night ✋ Sent from my Pixel XL using Tapatalk

02/14/2017, 07:54 PM	#707
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	__________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals. Last edited by soulpatch; 08/09/2017 at 10:50 AM.

02/19/2017, 10:44 AM	#708
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	SO they say measure three times for a reason. I finished the shell of the cabinet, got it on the wall, went to flip open the one compartment and realized I did not have the room. The wall space next to the tank is 31" long. The cabinet is 25 inches long but I neglected to account for the swing open portion and the small gap which takes it to 32 1/8 inches wide which is too much. Given that the hinges are on the tank side that wont work to even open it enough for me to get into things as it will rub. so for now scrapping the idea till Summer when I can come back with full allotment of tools and more time. I will move the ATO container out of the stand this weekend and finally set up the calcium reactor (well start to) tonight or tomorrow. I need to get that going and stabilized as I have some show pieces of SPS I want to pick up. Walt Disney Acro being one.... __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/19/2017, 05:13 PM	#709
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	OK so the idea might not be scrapped but edited. I think I will mount the cabinet to the wall directly without the sliders so I dont have to worry about anything behind the tank. Doing so impacts the closet door slightly but I can open it enough and it is a 32" door so rather large. So at this point I have 2 options as I see it. Option 1: I put the controllers on the 1/4" MDF I have and the hinges and all the electronics hidden behind the "door" This would probably look the cleanest but it would miss the look of seeing the power bricks and electronics that is kinda cool in its own right. Option 2: I put some corner brackets in the inner portion and have a false wall sit on them with velcro. I could then recess the "wall" slightly so I could have the EB8s and other apex modules with the controllers and such on the wall with all the wires and power bricks hidden behind it in the back compartment. Regardless of option I will likely merge a few units onto single plugs with a few power strips so as to free up some plugs in the system now. IE my jabeo PP8 and Skimmer are all on the same settings so no need to have seperate plugs for them all. I am going to have to rewrie some anyway with the calcium reactor needing a few plugs Thoughts? __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/20/2017, 10:20 AM	#711
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	So while online last night i saw bao is now making biards for controller setups. So i am going to slap the piece if mdf in there recessed and mount to that with electronics showing and see how i like it. If i stick with it then ill order a board from bao and redo the enclosure to match or have him make it for me. If i dont like it then ill get a cabinet from ikea or such and redo with the closed doors or soemthing. I think this is one i need to build and see to know if i will like it Sent from my SM-G935T using Tapatalk __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/21/2017, 02:10 PM	#712
texdoc77 Registered Member Join Date: May 2015 Location: Waco, TX Posts: 417	Skimmer Been away for a while, but had a quick question. What skimmer are you currently using. I thought you started with a LifeReef, but I thought I saw where you said you were using an Aquamaxx recently. I may be making this stuff up. Looking to upgrade myself... Thanks, also BTW tanked is now crystal clear, but still having alk issues, you? SC __________________ "The terrible thing, the almost impossible thing, is to hand over your whole self; all your wishes and precautions; to Christ." -C.S. Lewis (Mere Christianity) Current Tank Info: Currently Rebuilding

02/21/2017, 02:19 PM	#713
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	I upgraded to the lifereef when I went from my aquamaxx on the nano. That said if I were to go needle wheel on this tank I would likely get another aquamaxx. For the cost though you are basically in lifereef territory and since they use any pump long term you are better off with lifereef IMO. Yes still having ALK crap out on me. I think I should haev the calcium reactor up this week so I am hopeful that those issues will be resolved shortly. Other option is to continue to suppliment with alk dosing but I think once the calc reactor is up I should be good. Obviously will take some time to get it dialed in and such though. I just have to slap this cabinet together (though I will admit once I figured out my botched measurement plans I did not sand enough or put as much polish as I normally would so when I get the BAO panel later I will rebuild or have Ben make me an enclosure up to my standards...) to move my electronics and wire everything up for the calcium reactor... __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/21/2017, 04:43 PM	#714
texdoc77 Registered Member Join Date: May 2015 Location: Waco, TX Posts: 417	Been watching the cabinet build... I've made those kinds of mistakes all too often. On the LR skimmer did you go with the supplied pump and did you need the short neck? __________________ "The terrible thing, the almost impossible thing, is to hand over your whole self; all your wishes and precautions; to Christ." -C.S. Lewis (Mere Christianity) Current Tank Info: Currently Rebuilding

02/21/2017, 05:05 PM	#715
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	he gives rivted necks now so size can be upgraded at any time. I currently have it on a jabeo pump but anything will do so long as it can push some pressure __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/22/2017, 03:05 PM	#716
ReefWreak Registered Member Join Date: Sep 2005 Location: Astoria, NYC Posts: 10,159	I don't have time to provide feedback in any helpful way right now, but I'm at least glad I took the time to re-thumb-through your thread, as the pics were beautiful and nice and relaxing. Man do I have growth, but colors.... that's the hard part.... I'm sure on my T5/LED hybrid 300g tank the colors will be easy enough.... (that's a silent compliment on your colors, btw. I'm just awful at expressing myself in stream of consciousness)

02/22/2017, 05:08 PM	#717
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Thanks. I struggle to look backwards in the thread as I had some awesome acans that I have lost over time. Just this week I lost my melenarus wrasse as it went overflow diving after I removed the screen from my one drain temporarily to allow algae and such to get to my mesh socks. On the plus side I just spent a couple hundred and have the following coming: CUC refresh Tail spot blenny Bartlett anthias trio Australian harlequin tusk juvi Get them in on Friday. I took off to set up the electrical box so will be a good time to mess with some fish as well!!! __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/22/2017, 05:48 PM	#718
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Correction the wrasse is still alive. First time since sunday i have seen him but he is swimming. Bit banged up but alive!!!!!! Sent from my SM-G935T using Tapatalk __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/23/2017, 08:06 PM	#719
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Cabinet hung finally... In this pic you can see the corner brackets with the velcro on them for the panel to rest on Here is with panel Sent from my SM-G935T using Tapatalk __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/23/2017, 08:07 PM	#720
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Now to remove items from tank stand and wire up into the cabinet.. Sent from my SM-G935T using Tapatalk __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/24/2017, 02:17 PM	#721
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Need to do some cleanup yet and reglue one or two of the wire passthroughs but she is up and running... Things on panel laid out Wires wires everywhere. Good thing i labeled everything Finished for niw as i have ti get my calc reactor running and still get to the gym and lfs yet today... I will clean up some of the rest later and srill might reach out to local glass shop about smoked glass doors Sent from my SM-G935T using Tapatalk __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/24/2017, 04:50 PM	#722
Farmreefer Registered Member Join Date: Jan 2016 Posts: 151	Looks great Sent from my iPad using Tapatalk

02/24/2017, 09:19 PM	#723
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	So in stand my ATO has been moved slightly to afford the needed space for the calcium reactor. I tested the custom regulator I got and had to do a small repair to the solenoid power supply as it was damaged in shipping. But it is up and ready to go now. Vertex calcium reactor has been filled with media and all the tubing connected. TOmorrow I need to connect the CO2 to the reactor, hook up the PH controller, and hook up the new Spectrapure feed pump. I also need to get my fxface tomorrow. Its a good weekend for the reef tank!!! __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/25/2017, 03:03 PM	#724
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	Got the fish and the calcium react9r is feeding now via new feedpump... Sent from my SM-G935T using Tapatalk __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.

02/25/2017, 03:04 PM	#725
soulpatch Registered Member Join Date: Dec 2014 Location: Downingtown, PA Posts: 4,017	The things are still tight in the stand. I think im back to moving the ato container out of the stand or switching to a solenoid instead of a container... Sent from my SM-G935T using Tapatalk __________________ 150 SC tank build: http://www.reefcentral.com/forums/showthread.php?t=2550948 Some have bar tabs. I have a coral tab at my LFS. Life goals.