Temperature Control

gatekeeperdi · 05/22/2015, 03:23 AM

Hi, I am currently controlling my 2 titanium heaters using the GHL powerbar, a temperature probe and my Profilux plus II. I want to set up two cooling fans on the tank to kick in when the temperature goes up, presuming we're going to get some warm weather in the summer, but continue to run the heaters if the temperature falls.

What settings do I need to use on the GHL to do this please?

Thanks,Di

Matthias Gross · 05/26/2015, 11:05 AM

since you already control heaters with the ProfiLux you did most of the settings

if you want to add a chiller then just use a socket as "temperature 1 cooling"

if you want a larger temp. distance between switching heating and cooling then change "cooling distance" in the temp. settings

05/22/2015, 03:23 AM	#1
gatekeeperdi Registered Member Join Date: Jan 2015 Location: Tamworth, England Posts: 18	Temperature Control Hi, I am currently controlling my 2 titanium heaters using the GHL powerbar, a temperature probe and my Profilux plus II. I want to set up two cooling fans on the tank to kick in when the temperature goes up, presuming we're going to get some warm weather in the summer, but continue to run the heaters if the temperature falls. What settings do I need to use on the GHL to do this please? Thanks,Di

05/26/2015, 11:05 AM	#2
Matthias Gross RC Sponsor Join Date: Jan 2006 Location: Kaiserslautern, Germany Posts: 1,163	since you already control heaters with the ProfiLux you did most of the settings if you want to add a chiller then just use a socket as "temperature 1 cooling" if you want a larger temp. distance between switching heating and cooling then change "cooling distance" in the temp. settings __________________ Kind regards! Current Tank Info: Saltwater tank 700l + freshwater tank 400l