|
04/07/2018, 02:36 PM | #1051 |
Registered Member
Join Date: Oct 2010
Location: NORWAY
Posts: 83
|
Hi
Does anyone know where I can find the latest firmware for Mac? Thanks:-) |
04/07/2018, 03:02 PM | #1052 | |
Registered Member
Join Date: Dec 2016
Location: Collegeville PA
Posts: 147
|
Pacific Sun Kore 5th dosing Fan Club
Quote:
In the mean time I use the small Pellegrino glass bottles and they fit in the holders and the magnetic stirrers works.... https://www.google.com/search?q=pell...3sPf_P1JcynPM: Sent from my iPad using Tapatalk |
|
04/11/2018, 11:22 AM | #1053 |
Registered Member
Join Date: Sep 2014
Location: A green place near London, UK
Posts: 172
|
I set the doser for 6ml total using C5, 1.2ml per dose.
I checked the activities for the day after all 5 doses had been done (I heard the last one and it was a short dose) but it says 35.95ml dosed today... I don't think it dosed that much and I'm fairly sure I would have a bacterial bloom by now if it had dosed that much carbon source, but has anyone had this happen before? I'll obviously be checking again tomorrow as today was the first day of using the doser for this and I hadn't used it for some time. Liquids status shows the dose should be 6ml per day and says that 6ml was used. |
04/11/2018, 07:01 PM | #1054 | |
Registered Member
Join Date: Mar 2008
Location: Lithuania
Posts: 46
|
Quote:
This solved the blinking screen and refill alarm of pump 6&7. Now the doser is back to acting normal. Thank you Sent from my iPhone using Tapatalk |
|
04/16/2018, 09:22 AM | #1055 |
Registered Member
Join Date: Nov 2015
Posts: 2
|
I’ve installed Dozing Pacific sun on my Macintosh operating system but it doesn’t inject at the time it is set and when I set and save the setting I push the read button it goes back to it’s factory setting and I even see this problem on Android system.
|
04/16/2018, 11:26 AM | #1056 |
Registered Member
Join Date: Sep 2014
Location: A green place near London, UK
Posts: 172
|
Now I have it set for 12ml total, C5 (2.4ml per dose) starting at 2pm.
After I heard it run the last dose of the day I checked the summary on the main page of the software and it stated 9.56ml dosed for the day... I now have no idea if it is actually dosing what it should be dosing or not... |
04/16/2018, 04:43 PM | #1057 |
Registered Member
Join Date: Mar 2016
Location: Portugal
Posts: 405
|
Hi Pacsun.
Do you have a stirrrer for a glass 5 liters container? |
04/18/2018, 12:42 AM | #1058 |
Registered Member
Join Date: Aug 2015
Location: Poland
Posts: 652
|
Hello, you ask about single stirrer?
Yes, we will present it on Interzoo this year.
__________________
Home for Advanced Technology... www.Pacific-Sun.eu |
04/18/2018, 04:39 AM | #1059 |
Registered Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
|
Several questions asked about pages back. Been sitting there waiting for an answer. Prem finally comes on after weeks of being AWOL and answer the last question in the thread about a magnetic stirrer......
Really? I hate to say it, but this was one of the biggest POS I have ever bought in my life. No support other then if something doesn't work then it must be a bluetooth issue. How about this, get off the 10 year old protocol that obviously is causing issues and get with the times. Spend a few extra bucks and put a WIFI card in the damn th ing so it might actually work right and every time(you already charge a premium for an inferior product, pretty sure you would still be making a profit if you added a wifi card instead of BT). Firmware upgrades that break the thing so it has to be sent it for repairs, guess what you won't see it for months as it has to go to Poland, if it makes it there. Sorry to say, the hardware works great, the software is absolute garbage. Pony up some money for real developers instead of hiring 10 year olds to do your software. And for the love of god get rid of the bluetooth protocol. FWIW I just literally threw this giant POS in the trash and will be buying something else as a doser. Heck might even go back to standalone BRS single doser, atleast they worked!
__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256 Originally posted by der_wille_zur_macht: "He's just taking his lunch to work" |
04/18/2018, 06:12 PM | #1060 |
Registered Member
Join Date: Mar 2016
Location: Portugal
Posts: 405
|
|
04/18/2018, 07:40 PM | #1061 | |
Registered Member
Join Date: Apr 2017
Location: UK
Posts: 19
|
Quote:
I'm sure they have their threads on many forums and social networks out there so you can't expect them to chase each issue posted here. Przem always refers people to PacSun service for that reason. As to their equipment. I think they listened to your suggestions cause apparently new Kore 7th will be wifi operated both from Android and iOS devices. Finally, about bluetooth issues. I had some with my laptop sitting 3ft from doser and losing connection... While never had them when using my iMac from room upstairs. But didn't like the actual software on mac. Started using android app and never had issue. So is it software or bluetooth issues? Wysłane z mojego Moto G (4) przy użyciu Tapatalka |
|
04/20/2018, 04:55 AM | #1062 |
Registered Member
Join Date: Dec 2012
Posts: 80
|
@homer1475 - We asked many times here on this topic and on any other forums for direct contact with us on mail at service@pacific-sun.eu as we can't follow all topics in all forums and answer as fast as we are able to do it on mail.
If You still have some problems with Your doser please contact with us on mail we will try our best to solve Your problem. Regarding bluetooth - we use this protocol since beggining of our production (in all products lamps, dosers) and we understand that this technology have some limitations but also have some advantages like very simple configuration. If computer which is used for configuration have good quality Bluetooth module there is no problems with connection. In our new products like Althea T5 lamps we already implemented Wifi connection. New Kore 5th and Kore 7th dosers also will have optional Wifi for configuration and USB for firmware upgrade. Best regards Pacific Sun Service |
05/20/2018, 09:15 AM | #1063 |
Registered Member
Join Date: Mar 2016
Location: Portugal
Posts: 405
|
|
05/31/2018, 05:56 PM | #1064 | |
Registered Member
Join Date: Mar 2016
Location: Portugal
Posts: 405
|
Quote:
@Przemek : anybody? |
|
06/06/2018, 12:52 PM | #1066 |
Registered Member
Join Date: May 2017
Location: Netherlands
Posts: 5
|
What is the latest version of firmware for PC?
|
06/07/2018, 02:04 AM | #1067 |
Registered Member
Join Date: Dec 2012
Posts: 80
|
@Spenc3r - Last firmware version You can download from this link http://www.pacific-sun.eu/pliki/kore_5th_1.8.16.bin
Remember to use Firmware uploader application for firmware upgrade, You can download it here - http://pacific-sun.eu/firmware_update/ Best regards Pacific Sun Service. |
06/07/2018, 02:06 AM | #1068 | |
Registered Member
Join Date: May 2017
Location: Netherlands
Posts: 5
|
Quote:
Thank you for your answer. I tried to update but always getting the info: not responding Verzonden vanaf mijn iPhone met Tapatalk |
|
06/07/2018, 04:23 AM | #1069 |
Registered Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
|
Cannot for the life of me get the new firmware uploaded. Keep getting a different CRC error every time.
And yes I have tried the rescue mode. Thats the only way I can get it to start uploading. I get about half way through the update, then the CRC error. I've tried about 50 times now and every time I get a different CRC error. EDIT: NVM I just threw it away, for real this time. I'm sick of spending hours on firmware updates. New doser on order. I cannot for the life of me have complete confidence in a doser that only works half the time, and you have to spend hours on workarounds to get a new firmware updated. Any ideas?
__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256 Originally posted by der_wille_zur_macht: "He's just taking his lunch to work" Last edited by homer1475; 06/07/2018 at 04:48 AM. |
06/09/2018, 11:50 AM | #1070 |
Registered Member
Join Date: Aug 2015
Location: Poland
Posts: 652
|
@Homer
Have you sent email to service with support request? If not - hey are not reading RC frequently so you can wait for reply long time...(we wrote that here many times). Regarding reported issue. 1. Which OS are you using? Windows? Mac OS? Android? 2. Which Bluetooth module (type/class). If you are getting troubles during firmware update(CRC errors) it usually mean(99% situations) that you are using laptop with internal Bluetooth module with very small output power(Class 4 - 1 mW). They are working fine with your mouse or headphones but cause use cheap radios - not support properly many professional communication protocols (like RFCOMM/Serial) and simply can't transfer one file(firmware file) without signal loss. They will work quite good(again - usually) when you are programming device(small data amounts are transferred) - but not when they need to receive one file (without divide it into smaller packets). We sold more than 4000 dosers since 2014 year and IF Customers re3ported troubles with firmware updates - it was sourced by reason like above(we inform about that on our website and manual - that Classs 1 module is needed - or any laptop with "better" quality radio installed inside. All newest "ultrabooks" are made with highest energy saving profiles - manufacturers are fixed about longest working time and they simply use cheap and weak radios(Class 4 have 1mW output power - Class 1 - 100mW. The difference is 100x ) Thats answer. If you need any advanced troubleshooting - please contact with our service. They will br happy assist you in firmware update - they can even do that remotely. BR Przemek
__________________
Home for Advanced Technology... www.Pacific-Sun.eu |
06/09/2018, 11:53 AM | #1071 | |
Registered Member
Join Date: Aug 2015
Location: Poland
Posts: 652
|
Quote:
As I see our support team asked you also about future direct contacts with our service - it really simplify everything.
__________________
Home for Advanced Technology... www.Pacific-Sun.eu |
|
06/09/2018, 11:56 AM | #1072 | |
Registered Member
Join Date: Aug 2015
Location: Poland
Posts: 652
|
Quote:
Have you pressed reset button after choosing file for firmware update?
__________________
Home for Advanced Technology... www.Pacific-Sun.eu |
|
06/09/2018, 12:04 PM | #1073 |
Registered Member
Join Date: May 2017
Location: Netherlands
Posts: 5
|
|
06/09/2018, 03:30 PM | #1074 | |
Registered Member
Join Date: Mar 2016
Location: Portugal
Posts: 405
|
[QUOTE=intheshaddow;25447701]
Quote:
Thks @intheshaddow. This is really annoying!!!! Got the update tool, but can’t find the firmware file. Please anybody knows where can I get it? |
|
06/09/2018, 03:47 PM | #1075 |
Registered Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
|
And there it is.....
Customers fault because again, it must be the crappy BT card in my laptop. Funny thing is, I just looked up my bluetooth card. Realtek RTL8761ATV-CG
Not that it matters since the thing is in the garbage. Like I said before, hardware is great, software leaves a little less to be desired.
__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256 Originally posted by der_wille_zur_macht: "He's just taking his lunch to work" Last edited by homer1475; 06/09/2018 at 03:52 PM. |
Tags |
junk trash |
|
|