|
12/31/2018, 02:12 PM | #1 |
Registered Member
Join Date: Feb 2007
Location: North East Ohio
Posts: 221
|
what size bulkhead fitting for 63MM hole?
I have a 63mm hole saw from an older project.
I just used the saw on a fuge tank I'm building, but I can't remember for sure what size bulkhead fitting to use. I'm thinking this is 1 1/2 inch ABS - or Schedule 40. Anybody got the specs on bulkhead hole sizes for both ABS and Sch 40? |
12/31/2018, 02:37 PM | #2 |
Registered Member
Join Date: Feb 2006
Location: Irvine, CA
Posts: 606
|
__________________
Bruce Current Tank Info: 150G mixed reef (6x Blue Acro 20K Pro COB LEDs, 4x 80W T5 supplement), 150g fw discus (T5 lighting), 110G fw Angelfish (DIY LED lighting), 4 x 40 g frag tanks (DIY LED). |
12/31/2018, 02:46 PM | #3 |
Registered Member
Join Date: Feb 2007
Location: North East Ohio
Posts: 221
|
Thanks but that chart seems off for max hole size. For example I have some 1" ABS bulkheads. The chart has max for 1" at 68mm - but that's WAY too big. The entire fitting is not 68MM in diameter.
|
12/31/2018, 03:17 PM | #4 | |
Registered Member
Join Date: Feb 2006
Location: Irvine, CA
Posts: 606
|
Quote:
__________________
Bruce Current Tank Info: 150G mixed reef (6x Blue Acro 20K Pro COB LEDs, 4x 80W T5 supplement), 150g fw discus (T5 lighting), 110G fw Angelfish (DIY LED lighting), 4 x 40 g frag tanks (DIY LED). |
|
12/31/2018, 07:33 PM | #5 |
Registered Member
Join Date: Oct 2006
Location: Barrie, Ontario, Canada
Posts: 6,639
|
All of them are different...3 different manufacturers will all have different sizes for same bulkhead
|
01/07/2019, 02:49 AM | #6 |
Registered Member
Join Date: Apr 2006
Location: Malta
Posts: 22
|
Hi
Usually 63mm is a 2" fitting. At least it is the OD of a 2" pipe Regards Tristan |
Thread Tools | |
|
|