|
09/02/2014, 04:12 PM | #1 |
Registered Member
|
GHL Doser 2 Pre Order Starts!
After the massively successful launch of the NEW GHL Doser-2 at Macna Last weekend we can now announce the pre order schedule.
But first a key reminder of the features that made the Doser one of the star attractions to the show! Key features • Built in Wifi • IOS - Android - MY GHL cloud and direct software enabled and ready. • Available in 3 or 4 pump units (3 pump can be upgraded to 4 pump later on) • Total of 16 pumps in one chain • Stepper motor driven • ALL German parts • Doses down to 0.1ML • Interactive control will monitor your container levels and warn you when one is running low • Pharm grade dosing tubing allowing the dosing of Iodine and other strong chemicals • Level ports for Auto top off and Auto water changes • Temperature port for monitoring chilled coral fine foods. • PAB (ProfiLux address Bus) enabled allowing for expansive future add on accessories • 4 x 24vDC inputs for GHL’s dedicated stirrers. • 2 year warranty an all parts other than service items such as peri tubing and pumps. Full details here https://aquariumcomputer.com/en-GB/products/ghl-doser-2 Pre Orders start 15th September. 3 channel doser = $484.00 (USD) 4 channel doser = $559.00 (USD) We have a significant dealer base so please email us info@ghlna.com for the closest dealer to you. Reef central stock holding sponsors are Aqua Cave Premium Aquatics Salty Supply Due too sponsorship restrictions we are unable to list others.
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! Last edited by AQD_ottawa; 09/02/2014 at 04:22 PM. |
09/03/2014, 04:50 AM | #2 |
Registered Member
Join Date: Oct 2011
Posts: 411
|
Just wondering if the doser 2 standalone can be used with the profilux? or do you need to buy the slave.
|
09/03/2014, 06:04 AM | #3 |
Registered Member
|
You need to buy slave version.
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
09/03/2014, 12:40 PM | #4 |
Registered Member
Join Date: Oct 2011
Posts: 411
|
Oh, Would have been nice if it could be controlled also by the profilux . so you would have a choice of standalone or slave with one unit.
|
09/13/2014, 09:23 PM | #5 |
Registered Member
Join Date: Apr 2013
Location: Wappingers Falls
Posts: 324
|
Is the four pump standalone. Or is it the slave.
__________________
Elos 120, ATI Led Powermodule , Hopefully SPS dominated reef |
09/14/2014, 06:11 AM | #6 |
Registered Member
|
Stand alone, the slave has not launched yet.
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
09/16/2014, 02:31 AM | #7 |
Registered Member
Join Date: Apr 2013
Location: Wappingers Falls
Posts: 324
|
Is that stepper motor variable speed or single. So flr water changes can I up the speed or will it work on slow dosing speeds?
__________________
Elos 120, ATI Led Powermodule , Hopefully SPS dominated reef |
09/16/2014, 05:41 AM | #8 |
Registered Member
|
It is driven by time not speed. min dosing 0.1ml and max is currently 45ml per minute.
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
09/23/2014, 03:11 PM | #9 |
Registered Member
|
Many dealers across the USA and Canada now taking pre orders!
Get on the first wave. Stock holding info info@ghlna.com
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
09/30/2014, 02:45 PM | #10 |
Registered Member
Join Date: Mar 2014
Posts: 10
|
The pre order give a good price or is the same after ...... ?
|
09/30/2014, 02:46 PM | #11 |
Registered Member
|
Same after price has been set as low as possible for everyone to enjoy not just a few at the start.
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
09/30/2014, 04:04 PM | #12 |
Registered Member
Join Date: Feb 2009
Location: South Florida
Posts: 1,501
|
Any ideas of when will it hit the USA ?
__________________
Doggydoc Current Tank Info: 75 Gallon Rimless Cube |
09/30/2014, 04:11 PM | #13 |
Registered Member
|
we were told yesterday there is a two week delay so I am assuming this means we will receive into Ogdensburg warehouse last week of October if this schedule stays on target.
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
10/04/2014, 04:15 PM | #14 |
Registered Member
|
We are pleased to announce 2 more dealers to the GHL line up where you can pre order
http://www.cayugaaquatics.com/ http://www.picassoexoticaquatics.com/
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
10/16/2014, 08:29 AM | #15 |
Registered Member
Join Date: Mar 2011
Location: etiwanda, ca
Posts: 225
|
|
10/16/2014, 08:38 AM | #16 |
Registered Member
|
The issue here is cost.
why should profiLux owners pay for built in control that the SA doser comes which they dont need?
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
10/23/2014, 11:13 AM | #17 |
Registered Member
Join Date: Sep 2014
Location: France
Posts: 42
|
Maybe for have 1 temperature port + 2 level port, that which is cheaper than buy dosing pump + expansion box for just these need?
|
10/23/2014, 11:16 AM | #18 |
Registered Member
|
or you could add PLM-ph temp and PPLM-4level to you profilux controller
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
10/23/2014, 11:22 AM | #19 |
Registered Member
Join Date: Sep 2014
Location: France
Posts: 42
|
No because no free port (PLM-Oxygen + PLM-PWC).
And the logic is the same: GHL Doser 2 is cheaper than GHL Doser slave + PLM-ph-temp + PLM-4level |
10/23/2014, 11:25 AM | #20 |
Registered Member
|
then get the doser 2 slave when it launches
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
10/23/2014, 11:30 AM | #21 |
Registered Member
Join Date: Sep 2014
Location: France
Posts: 42
|
|
10/23/2014, 11:36 AM | #22 |
Registered Member
|
no i have no news, I am just saying IF the slave had these features then yes it would be better option, I have no more news than you do.
__________________
Michael Hall Tank Build and product reviews coming soon. 60x30x24 Ecotech powered, OLD Profilux 3 but looking to upgrade when market settles, Seneye Monitored, Bubble Magus DC Skimmed. Current Tank Info: Floating about on the water enjoying semi retirement!! |
|
|