|
07/30/2014, 10:08 AM | #1 |
Registered Member
Join Date: Sep 2010
Location: Farmington Ny
Posts: 854
|
Coralline algea bleaching
I've noticed my coralline turning white over the last few weeks. I think I have my params under control.
Temp 79 Salinity 1.026 Ph 8-8.2 Alk 10 PO4 .03 ? It's the API test kit and it's in the middle I know they are high but running gfo Nitrate 0 Idk calcium My lights are. 4 bulb t5.. 10000k,purple and 2 atinics they run for 10hr and white are on 4hrs Any help would be great thanks |
07/30/2014, 10:09 AM | #2 |
Moved On
Join Date: Apr 2013
Posts: 580
|
too much light would be my guess
|
07/30/2014, 10:23 AM | #3 |
Registered Member
Join Date: Sep 2010
Location: Farmington Ny
Posts: 854
|
|
07/30/2014, 10:27 AM | #4 |
Moved On
Join Date: Apr 2013
Posts: 580
|
Well 10 hours isn't really out of the ordinary so I would say too bright. I don't know much about t5 tho never used them. Maybe someone can chyme in on those.
|
07/30/2014, 10:34 AM | #5 |
Moved On
Join Date: Apr 2013
Posts: 580
|
Did you change bulbs recently or lighting fixture?
|
07/30/2014, 10:47 AM | #6 |
Moved On
Join Date: Jul 2014
Location: North Carolina
Posts: 104
|
You think you have parameters in check?
So what's your mag and cal? |
07/30/2014, 02:06 PM | #7 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
Those parameters should be fine, although a more precise phosphate measurement might be useful. I agree that lighting might be an issue, either too much or too little. A big change in the feeding level might have some effect, too.
__________________
Jonathan Bertoni |
07/30/2014, 02:33 PM | #8 |
Registered Member
Join Date: Sep 2010
Location: Farmington Ny
Posts: 854
|
The light fixture is 4 months old everything was brand new. Not sure of the mag levels and the last time I checked the cal was at 450 (3days ago)
|
07/30/2014, 02:57 PM | #9 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
Calcium at 450 ppm is fine. I can't comment on the lighting system because I don't know how long the various bulbs (or LEDs) last. My MH bulbs were good for more than 4 months, although the PC last only a bit longer than that.
__________________
Jonathan Bertoni |
07/30/2014, 04:32 PM | #10 |
Registered Member
Join Date: Sep 2010
Location: Farmington Ny
Posts: 854
|
From what I've researched t5s should last for 10 months - a year
|
07/30/2014, 05:34 PM | #11 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
I might start by getting a few second opinions on test kits, but it's possible that some animal is eating your coralline, depending on the patterns in the faded areas.
__________________
Jonathan Bertoni |
07/30/2014, 08:02 PM | #12 |
Registered Member
Join Date: Apr 2014
Posts: 693
|
Every time I used to get white in my 55G reef around the edges it was water quality, I could do a change it and it would bounce back.
I also had an urchin that would chow down on it as well. He went to another tank.
__________________
-------------------------------------------------------------------------------------------------------- 250G Acrylic, 40G sump, Dolphin Amp Master 4750, Predator Skimmer, BuildMyLed 20k XB, , ATO, |
07/31/2014, 07:21 AM | #13 |
Registered Member
Join Date: Sep 2010
Location: Farmington Ny
Posts: 854
|
The only thing in my tank is a pair of clowns, some hermits and snails. There are a few asterina stars but I pick them out when I see it. The bleaching is on top of the rocks, I'm thinking it's my lights
|
07/31/2014, 07:36 AM | #14 |
Registered Member
Join Date: Apr 2011
Posts: 46
|
How many corals do you have in your reef? lights won't cause it to bleach. It'll turn white if its been out of the water too long or if the corals are using Alk, Mag, and Ca faster which is a good thing. The more LPS, SPS corals there are the more they use=less for coralline algae
|
07/31/2014, 10:11 AM | #15 |
Registered Member
Join Date: Sep 2010
Location: Farmington Ny
Posts: 854
|
I have mostly frags, 2 zoanthids 1 sps and 4mushrooms and they are doing very well. My sps is about and inch tall
|
07/31/2014, 07:25 PM | #16 |
Registered Member
Join Date: Apr 2011
Posts: 46
|
Size of aquarium
|
07/31/2014, 07:26 PM | #17 |
Registered Member
Join Date: Apr 2011
Posts: 46
|
Also what's your magnesium.
|
08/01/2014, 07:05 AM | #18 |
Registered Member
Join Date: Sep 2010
Location: Farmington Ny
Posts: 854
|
|
08/01/2014, 07:09 AM | #19 |
Registered Member
Join Date: Apr 2011
Posts: 46
|
Magnesium is important as it allows calcium and alkalinity to be used. If magnesium is too high or too low or swings too much corals and coralline algae won't be able to efficiently use ca and alk. Which stunts growth. If your alk or magnesium spiked that can cause bleaching too.
I see your salinity is on the high side. Did it fall low at one point? A sudden drop in salinity can also cause problems. Or raising it too quickly. |
08/01/2014, 07:27 AM | #20 |
Addicted to salt
Join Date: Mar 2013
Location: Carrollwood, FL
Posts: 2,450
|
how old is the tank? my corraline completely bleached on walls and overflow but was from too intense LED lighting, lowered the intensity and it has exploded in growth, so much so that it is now on the snails.
__________________
"60% of the time it works every time..." - Anchorman Current Tank Info: 180 Aqueon RR / SRO3000Int / BLDC15 / TriggerSys custom Sump / AI Hydra 52 and Hydra 26 |
08/01/2014, 03:39 PM | #21 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
Magnesium is consumed by coralline and corals, to some extent. It mostly acts to keep calcium and alkalinity in solution, since saltwater is supersaturated with respect to calcium carbonate. I would test it, but magnesium rarely is a problem.
__________________
Jonathan Bertoni |
|
|