|
08/05/2017, 01:03 PM | #26 |
Registered Member
Join Date: Jan 2015
Posts: 31
|
Dang this is going to be sweet. Your display tank is gorgeous.
The sump stand should be more than adequate too. |
08/05/2017, 10:41 PM | #27 |
Registered Member
Join Date: Nov 2016
Location: Indiana
Posts: 8
|
That is a very nice plumbing setup you have going on. The only thing I would change personally is having the emergency go into on of the two middle sections of the sump. The reason I would do it that way is because the return section can fill up very fast and you wouldn't want a flood to occur because of that and since the middle areas have much more room they can hold more water and it would still make the loud noise to alert you.
Sent from my iPhone using Tapatalk |
08/06/2017, 09:19 AM | #28 | |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Quote:
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
|
08/06/2017, 09:25 AM | #29 |
Registered Member
Join Date: Nov 2016
Location: Indiana
Posts: 8
|
Alright, it's always good to test. It seems like you should have enough room in the sump so it sounds like you are all good to glue.
Sent from my iPhone using Tapatalk |
08/17/2017, 06:26 PM | #30 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Finally plumbing for tank is done. Still working on plumbing to deliver water after that can do leak test. I used silicone on all the bulkheads. Replaced main valves with gate valves. Hopefully it will all work out.
Sent from my SM-G930F using Tapatalk
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
08/27/2017, 07:23 PM | #31 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Almost done with my water mixing station
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
08/27/2017, 09:53 PM | #32 |
Registered Member
Join Date: Nov 2013
Location: Oakville, Canada
Posts: 4
|
Where did you get those tanks for your water mix station? I live in Toronto and will be looking to purchase water tanks like that for my own mixing station over the next few months. Thanks.
|
08/28/2017, 07:16 AM | #33 | |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Quote:
http://dynamicplasticsolutions.com/i...ertical-tanks/
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
|
08/28/2017, 11:23 AM | #34 |
A Reef Enthusiast
Join Date: Aug 2005
Location: Boston
Posts: 364
|
Nice looking tank.
How thick are the glass panels? and how wide are the eurobrace pieces? you ordered the stand from Miracle as well? How many inches are those steel bars on the stand? Thanks
__________________
Bao ================================= ><((((º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><((((º> ·´¯`·.¸. , . .·´¯`·.. >((((º> |
08/29/2017, 03:58 PM | #35 | |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Quote:
Sent from my SM-G930F using Tapatalk
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
|
08/29/2017, 03:59 PM | #36 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Picked up my new powerhead from canada corals. Not sure if it will work ok on 19mm glass and i dont have to go mp60.
Sent from my SM-G930F using Tapatalk
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
08/29/2017, 04:00 PM | #37 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Pics
Sent from my SM-G930F using Tapatalk
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
09/03/2017, 01:47 PM | #38 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Hi guys my rock is here got 130lb of marco dry rock and 30 lb of dry live rock. To het some colorine algae. However they are diff color. Do you know if marco rock will change the color as it looks really white now? Maybe i should not use live rock at all?
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
09/03/2017, 01:49 PM | #39 |
Registered Member
Join Date: Nov 2016
Location: Indiana
Posts: 8
|
From what I have experienced over time it will all get covered in coraline and then it will all look the same but that can take some amount of time.
Sent from my iPhone using Tapatalk |
09/14/2017, 06:05 PM | #40 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
First look at my aquascape not sure if not too much sand.
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
09/15/2017, 02:15 PM | #41 |
Registered Member
Join Date: Jun 2016
Location: Massachusetts
Posts: 340
|
a nice think sand bed is nice, the scape looks good too. Your Marco rocks will color up over time and having the dry live rock in the tank with them will/should help speed up that process cause they will help seed the tank with coralline algae
btw I subbed the thread, looking forward to see what comes next. I'm looking to do a large tank like this sometime next year so this will be a good learning experience |
09/15/2017, 06:31 PM | #42 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
My sump is ready and running waiting for skimmer and apex.
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
09/23/2017, 06:21 PM | #43 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
My skimmer finally arrived its all set. Tuned it on ar low speed and opened gate valve full. I guess i need run it like that for couple of weeks. Had to make a small stand to keep it at 8in deep
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
10/05/2017, 05:47 PM | #44 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Hi guys probably stupid question but how do i dial the skimmer? Its been running full gate valve open for about 2 weeks. First question is what are the air intakes on photo for? Second how do i dial skimmer with gate valve. And third why my foam is not reaching to the top is that because water clean? Thanks for your help
Sent from my SM-G930F using Tapatalk
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
10/05/2017, 06:08 PM | #45 |
Registered Member
|
Those intakes are silencers , keeps the noise down..
To dial it in you just start closing the valve a tiny bit at a time.. Go slow it may take a few days to find its happy spot, then when you start adding fish you will be tweaking it some more...
__________________
John Adams: "In my many years I have come to a conclusion that one useless man is a shame, two is a law firm, and three or more is a congress." Current Tank Info: 29g with 2 Engineer gobies |
10/12/2017, 12:05 PM | #46 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Playing with a new toy
Sent from my SM-G930F using Tapatalk
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
10/14/2017, 04:22 PM | #47 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Bought this pump to try for my qt
Sent from my SM-G930F using Tapatalk
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
10/14/2017, 04:23 PM | #48 |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
My qt setup is almost ready
Sent from my SM-G930F using Tapatalk
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
10/16/2017, 11:48 AM | #49 |
Registered Member
Join Date: Feb 2008
Location: Claremont, California
Posts: 422
|
Saw your post in the Kessil AP700 thread about lighting - thought I would post here my thoughts instead of entering into a discussion in that thread.
You asked which lighting people prefer - Kessil AP700, Hydras or Radions. I've owned all three. First I would ask what type of coral you plan on keeping. I wouldn't use the Kessil for SPS. Currently I have an SPS tank with Radions and a 10 gallon LPS/softie tank with a Kessil A80. I love the look Kessil's produce (AP700, 360's or A80, they all produce the same light/shimmer), but the thing I did not like about the AP700 (which holds true for all the Kessil lights) is that they come off a bit dull - the tank won't appear bright unless you run the spectrum with more white. Also, the AP700 will not allow you to slowly mix or blend the spectrums as you change colors. Unless there has been a change in the programing of the lights, the AP700 will just "click" over to the next color if you program the lights to change spectrums throughout the day. Now, if you get Kessil A360's, you can buy the spectral controller and it will properly blend the spectrums as they change colors. It looks a lot better than the AP700, and the actual light and shimmer is the same as AP700. Make sense? If you like Kessil, and you don't plan on keeping SPS (Montipora's will probably do fine), I would use A360's with the spectral controller. I think the Kessil out of all three LED lights looks the nicest and gives the best looking natural shimmer. The Hydra and Radions look very similar - you'll be able to independently control each color channel, but you'll find that you need to run the Reds and Greens lower, whites low and blues high. The Hyrda aren't as bright as the Radions (unless you run the whites higher). The Radion G4's are bright. I run a pretty blue spectrum and the whole tank is really bright. There is a bit of a "disco ball" affect you hear people talking about, but's I don't think it's bad or really that noticeable. I still really like my Radions. Hopefully this gives you an idea of what each light has to offer.
__________________
Jeff Current Tank Info: 35x28x20 starphire Lee Mar Last edited by Jmason95; 10/16/2017 at 01:20 PM. |
10/16/2017, 12:32 PM | #50 | |
Registered Member
Join Date: Mar 2017
Location: Brampton ON Canada
Posts: 73
|
Quote:
Is that really not a good light for SPS corals ? I heard that people dont even run the lights 100% of power, why would that not be enough ? I can go with radion but dont like that disco effect I see on others pictures. Plus I dont need any controller more to buy. For my tank I guess I would need 3 units and it comes to much more money :-(
__________________
180gal starphire reef build http://www.reefcentral.com/forums/showthread.php?p=25040952 |
|
Tags |
180gallon |
|
|