|
12/17/2017, 06:12 PM | #1 |
Registered Member
Join Date: Sep 2014
Posts: 25
|
New Aragonite sand wet in bucket???
Hey all,
Switching out my substrate from cc to aragonite sand and I’m only adding a little at a time. Was wondering if it’s okay to keep the rest wet in the rinse bucket until I add it all? Or would it better to rinse again when I add the rest? Only adding a little because it was late and also was trying to avoid any possible mini-cycle as much as possible. Thanks |
12/17/2017, 06:48 PM | #2 |
Registered Member
Join Date: Apr 2014
Location: Pennsylvania
Posts: 1,022
|
Just give a good rinse before adding to the tank and all will be fine. I like to rinse mine with a hose in a 5g bucket stirring the sand till the water runs clear. That way you know everything is out and you have clean sand.
__________________
Knowledge is knowing a tomato is a fruit. Wisdom is not putting it into a fruit salad. Philosophy is wondering if that means ketchup is a smoothie. Current tank info: 45g SCA Cube |
12/17/2017, 07:02 PM | #3 |
Registered Member
Join Date: Sep 2014
Posts: 25
|
Ok cool, thanks for the input.
I only got a 15lb bag to start. Dumped it in a 5 gal bucket and then tipped it at an angle in my utility sink while I had the water going in it. Went back to work on my tank and when I can back, voila! Clean sand lol. |
12/17/2017, 07:48 PM | #4 |
Registered Member
Join Date: Apr 2014
Location: Pennsylvania
Posts: 1,022
|
Your all good then
__________________
Knowledge is knowing a tomato is a fruit. Wisdom is not putting it into a fruit salad. Philosophy is wondering if that means ketchup is a smoothie. Current tank info: 45g SCA Cube |
|
|