|
08/13/2017, 10:57 AM | #1 |
Registered Member
Join Date: May 2017
Posts: 50
|
E'z Chiller Mod by Seyoz
This Mod: I had been thinking about its application for few months.
Then I came into two devices. One is A "Water Cooler by Arrowhead." This Unit Has Both the Hot/Cold Sides. Then I Got a "Water Cooler by Royal." This unit Has a Cold Side Only. So After I Reviewed both Working Schematics. I realized they were both (1/12Hp), but the "Royal" Model was easier to modify for my application as a chiller. The First Test, I simply wound vinyl hose inside the Water Cooling Tower. Then, Back-Pressure Controlled through a "Well Established Non-Tumbling Carbon Reactor" as A "Thaw Guard!" Besides A Ball Valve, Digital Temp, Heater. kept 76-77 instead of 82-83. but has ability for early 70's. I wont disclose all research, at present time. |
08/13/2017, 05:25 PM | #2 |
Grizzled & Cynical
Join Date: Apr 2006
Location: Stamford, CT
Posts: 17,319
|
I imagine it'd work for small volumes. Tried the old dorm fridge cooler years ago and it worked ok .... for small volumes. These things just aren't designed for through cooling though.
__________________
Simon Got back into the hobby ..... planned to keep it simple ..... yeah, right ..... clearly I need a new plan! Pet peeve: anemones host clowns; clowns do not host anemones! Current Tank Info: 450 Reef; 120 refugium; 60 Frag Tank, 30 Introduction tank; multiple QTs |
Tags |
chiller mod, diy chiller mods, seyoz waterchiller mod |
|
|