|
09/08/2018, 03:22 PM | #1 |
Registered Member
Join Date: May 2018
Posts: 1
|
tunze 6055 with 7095
Hello,
I have 2 tunze 6055 conected to 7095 and i put the contrlle on the max. speed and the leds only go`s to 80%, you know why the 7095 controller don`t go at 100%? Thanks |
09/10/2018, 03:28 PM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
By feel, compare the flow with no controller and full power on the pump and 100% setting on the controller, they should be the same. On the smallest pump models due to low amperage available it was possible that the 7095 is at 100% but only shows 80%. Also, if this is an older 6055 with the power supply with voltage jumpers, it should have the 24V jumper installed. This will typically be only that their is not enough power to light the 100% light, but it is at 100%.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|