|
11/12/2017, 05:06 PM | #1 |
Registered Member
Join Date: Aug 2003
Location: Chandler AZ.
Posts: 202
|
9011 replacement parts
Hi Roger! Do you have any old inventory left for the 9011? I'm looking for a impeller housing with nozzle 3130.130 and two motor block covers 3005.130
Also looking for two intake sleeves 9010.400, a bottom cover 9010.200 and a 9010.350 cap for outlet if used in the tank. Thank you |
11/13/2017, 11:00 AM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
We have all of these parts, you can order them on Tunze.com, I actually have every part to build a 9011, we just don't have fully assembled/packaged skimmers anymore. I would just have 1 each on the 9010.300 and 3005.130, but I can order in more.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
11/13/2017, 09:03 PM | #3 |
Registered Member
Join Date: Aug 2003
Location: Chandler AZ.
Posts: 202
|
That's great! I will send you email for the parts needed. Can you recommend a glue or solvent to repair a housing? The bracket that has a u shape in the center for pump inlet has broken off in a 9021 housing.
Thank you |
11/14/2017, 10:19 AM | #4 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
The factory glue is Tangit by Henkel, I am not sure of a source in the US. Henkel US doesn't seem to offer it in the US range, they are a huge company and own DuckTape, Loctite and other brands. It is basically a gel PVC/ABS cement. We used to offer it but it is flammable and we can no longer import it due to freight regulations.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
Thread Tools | |
|
|