6105 not working in controller mode

herbklee · 02/06/2018, 09:14 AM

Just replaced my 6095s with a pair of brand new 6105s last night.

I connected everything to my GHL Profilux III controller as before.

1 works fine.

the other does not work in controller mode, but works in other modes.
I'm assuming this means tll the cables are working OK in this situation?

Please help.

rvitko · 02/06/2018, 03:05 PM

I assume by controller mode you mean external mode? One possibility would be the cable but then it should work if you switch cables between the pumps. The other thing I have seen but not common is that a 7090 (built in controller) has a bad DIN connector, in that case if you swap the controller that pump should work. The pump can be unplugged from the controller inside, the manual explains how.

02/06/2018, 09:14 AM	#1
herbklee Registered Member Join Date: Mar 2011 Location: etiwanda, ca Posts: 225	6105 not working in controller mode Just replaced my 6095s with a pair of brand new 6105s last night. I connected everything to my GHL Profilux III controller as before. 1 works fine. the other does not work in controller mode, but works in other modes. I'm assuming this means tll the cables are working OK in this situation? Please help.

02/06/2018, 03:05 PM	#2
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 35,785	I assume by controller mode you mean external mode? One possibility would be the cable but then it should work if you switch cables between the pumps. The other thing I have seen but not common is that a 7090 (built in controller) has a bad DIN connector, in that case if you swap the controller that pump should work. The pump can be unplugged from the controller inside, the manual explains how. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish