|
|
|
04/06/2019, 09:57 AM
|
#1 |
|
Registered Member
Join Date: Dec 2011
Location: Saint Petersburg, FL
Posts: 136
|
A way to have pH dependant ATO with Apex.
I want to run dual pumps in my ATO resivore. The first pump is typically activated when the water level triggers the ATO and runs ATO resivore-> kalk reactor-> sump. However if the ATO is tripped and the pH is over a set point, lets say 8.4. The first pump wont kick on but the second will running ATO resivore-> sump and there by bypassing the kalk reactor. Can I make this happen with the Apex programming?
|
|
|
 |
|
|
