My Apex Tunze Settings and Profile examples. Help for others and feedback appreciated - Page 2

Creetin · 04/30/2011, 06:42 AM

Thanks for the write up and tips everyone, Its helped me.

mayolobeis · 05/11/2011, 10:51 AM

hi good afternoon

I wonder if you can put some pictures of the connections on your driver pumps'm thinking about buying a Tunza apex but I have my doubts as to connect greetings

grattings

CarlosS · 05/19/2011, 07:51 AM

Hi guys:

I have two pumps, one left side and one right side, both pumping to the center +/-. How could I program the apex to make waves switching the pumps? I mean, one pump on while another pump is off.

I will appreciate your reccommendations

Toomnymods · 07/30/2011, 08:51 AM

anyone done any programming on a 90 gallon tank with 2 tunze 6055's and apex?
this whole thread confused me and i really wanna have feed/maintance/dusk/dawn/tidal surges , etc incorporated into my reef i just dont understand all this programming talk

Toomnymods · 07/30/2011, 09:49 AM

tried copying and pasting and this is my error codes it is giving me someone please help i dont understand all this code stuff

Apex Outlet Setup

\\ Error: Expected ON or OFF OR PFx //Error: line 1 - Set Wave1 PF1
\\ Error: Expected ON or OFF OR PFx //Error: line 2 - If Time 1:00 to 1:59 Then duskdawn
\\ Error: Expected ON or OFF OR PFx //Error: line 3 - If Time 2:00 to 21:00 Then Wave1
\\ Error: Expected ON or OFF OR PFx //Error: line 4 - If Time 21:01 to 22:00 Then duskdawn
\\ Error: No such outlet name //Error: line 5 - If Outlet Timer = ON Then Flush1
\\ Error: Expected ON or OFF OR PFx //Error: line 6 - If Time 22:01 to 12:59 Then Night

RussM · 07/30/2011, 09:58 AM

Quote:

Originally Posted by Toomnymods

tried copying and pasting and this is my error codes it is giving me someone please help i dont understand all this code stuff

you must define and name the profiles before using them in outlet programming.

Toomnymods · 07/30/2011, 12:36 PM

i tried again and still keep getting 6 lines of error codes.. wish they had a dummy proof way of doing this without having to be a computer programmer to under stand it

Aquattro · 08/08/2011, 08:19 AM

Great thread, looking for something like this. Interesting idea, both pumps at one end of tank. You don't find you get any dead spots? Currently I'm running a 6100 from each rear corner of my 180, and feel I can do more with these pumps. I'll try to replicate your config, although any starting point you can recommend for a 6' tank might help

aquamanic · 08/08/2011, 09:48 AM

Remember that both profile and outlet names are case sensitive. Check that and see if it helps.

doctorgori · 08/08/2011, 09:54 AM

sincere appologies for the similar/duplicate new topic (mine is a lil broader in scope), I had no way of knowing....we could combine the two, is there a way?....

jeffreylam1132 · 08/18/2011, 03:03 PM

Very helpful program, Scott. Thanks!

jeffreylam1132 · 08/27/2011, 12:59 AM

How do I program the timer? Is it located in the outlet setup or the profile setup? I'm looking through the apex web page and I don't see anywhere to program these:

Timer1 (turns on every 120 minutes for 10 minutes. If timer 2 is on at that time, it should remain off.

OSC 120:00/010:00/000:00 Then ON
If Outlet Timer2 = ON Then OFF
If Time 19:30 to 11:30 Then OFF
If FeedA 000 Then OFF

Timer2 (turns on every 45 minutes for 15 minutes except if timer 3 is on)
OSC 045:00/015:00/000:00 Then ON
If Outlet Timer3 = ON Then OFF
If Time 19:30 to 11:30 Then OFF
If FeedA 000 Then OFF

Timer3 (turn on every 15 minutes for 5 minutes except if timer 1 is on)
OSC 015:00/005:00/000:00 Then ON
If Outlet Timer1 = ON Then OFF
If Time 19:30 to 11:30 Then OFF
If FeedA 000 Then OFF

aquamanic · 08/27/2011, 06:08 AM

Select 'Advanced' for the outlet type, then enter the program statements manually.

ebacon · 09/06/2011, 03:15 PM

so to be clear the 3 timers are virtual, still controlling the 2 var tunze's?

2 questions:
1) can you show what prgramming changes might be needed as my lights are on a RT+ 00:00 cycle

2) I am trying to incorporate this program using 2 large korala's (on or off) a maxijet, and a 6200 programable tunze.... Any suggestions?:

ostrow · 12/14/2011, 07:29 PM

It took me forever to shoot the videos. Sorry. Here's video on my 5' tank. If I set on an d off both at 3, the wave is so big water splashes out of the tank. I figure even with it as it is, the stress on the glass might not be worth it but it is so cool....

Aquattro · 12/24/2011, 10:31 AM

I just entered this set of profiles, and only got to see a bit of duskdawn before lights out (switch to night). This morning, lights on switched back to duskdawn, and all I have to say is that I need to make sure I'm home later today when Wave1 kicks in, or I might have a wet floor

I'm using 2 6100s, one each end of my 180, mounted top rear corner. Also have a 6080 and a 6060 in the 2 front top corners. Even with this, and the lower flow of the duskdawn, I'm getting a noticeable wave and seeing some crud floating off the rock work into suspension. Great stuff!!
Today is water change day, so I may move both 6100s to one end, and move the smaller fixed speed pumps to the opposite end, lower in the tank.

Aquattro · 12/24/2011, 06:26 PM

Question, not so much Apex related as it is Tunze, but using this setup, I get a fair bit of squealing from the pump driver, apparently when it shifts profiles. Anyone have this issue, or is that more related to the pump itself? I think it's just one, so maybe it just needs a good cleaning?

jefftse · 04/07/2012, 03:13 PM

I tried to setup 3 timers. timer 1 and 2 were used base_var1 and base_var2. how can I change the outlet type? I don't have anymore base_var left and the next one is the base_alarm.

Please advise

yachtdr22 · 04/09/2012, 05:37 AM

Greetings all...

Seeking advice... Looking for new flow system in my 125gal mixed reef (72x18x22) w/ RKL system

Vortech MP40 or 2) MP10's
Tunze ???

Advice?

Aquattro · 04/22/2012, 08:09 AM

After using the OP's profile setup, I've been very happy with the water movement. I've just got a good deal on 2 6055 pumps, and I'm wondiring if anyone has incorporated additional pumps controlled by the Apex into this scenario.
Should I attempt to enhance the wave motion, and if so, how? Or should I simply use a different set of profiles to move water? Any samples would be great...

earraval · 04/26/2012, 06:48 PM

hi guys, I would like a simple program like:
left tunze runs for 2 min and stop for 30 sec for 3 hours;
right tunze runs for 2 min and stop for 30 sec for 3 hours
and so on.....
Can anyone help me here? tks.....

Dave & Monica · 04/27/2012, 09:22 AM

I found the actual Neptune Apex manual to be very helpful with this type of configuration. I'm still setting up and configuring my Tunze 6095's so am not well versed to just program from memory, good luck though.

ecook280 · 04/27/2012, 06:22 PM

Got a pair of 6105's and used this basic setup, works great, thanks for sharing !!!

Dave & Monica · 05/02/2012, 05:04 AM

Yea - This thread helped a lot, this is what I ended up with: http://www.reefcentral.com/forums/sh....php?t=2162152

cbenner · 06/20/2012, 09:03 PM

Thanks so much for this thread.
I have had my Apex for a few months and just started controlling my Tunzes with it. I was having a rough time understanding how the profiles work, but after working with this I feel like i have a handle on it.
I love the controller and feel that it is worth every penny I spent on it.

Thanks Again

Cheers

Chris

04/30/2011, 06:42 AM	#26
Creetin Limestone Cowboy. Join Date: Jan 2004 Location: In a little place i like to call a little place. Posts: 4,552	Thanks for the write up and tips everyone, Its helped me. __________________ If only common sense was common. Current Tank Info: 300 gal marineland deep

05/19/2011, 07:51 AM	#28
CarlosS Fighting in Venezuela Join Date: Aug 2003 Location: Caracas, Venezuela Posts: 247	Hi guys: I have two pumps, one left side and one right side, both pumping to the center +/-. How could I program the apex to make waves switching the pumps? I mean, one pump on while another pump is off. I will appreciate your reccommendations __________________ Regards, Carlos Salas Current Tank Info: Reef, 287g total system, Bare Bottom, Hammerhead w/Oceansmotions in CL, (2) MH 400W 12000K + 14 Leds RB cree 3w, Reeflo Orca 200 Pro. Reef Crystals, Geo 624 Calcium Reactor, Kent Marine RO/DI, Apex full, SPS dominated

07/30/2011, 08:51 AM	#29
Toomnymods Registered Member Join Date: Jun 2002 Location: Grand Prairie, Tx. Posts: 640	anyone done any programming on a 90 gallon tank with 2 tunze 6055's and apex? this whole thread confused me and i really wanna have feed/maintance/dusk/dawn/tidal surges , etc incorporated into my reef i just dont understand all this programming talk __________________ 220 gallon Planet Aquarium RR tank, 40gal Trigger Systems sump, Geisemann Infinity 72" Current Tank Info: 90 gallon SPS reef W/ 30 gal sump / refuge :P

07/30/2011, 09:49 AM	#30
Toomnymods Registered Member Join Date: Jun 2002 Location: Grand Prairie, Tx. Posts: 640	tried copying and pasting and this is my error codes it is giving me someone please help i dont understand all this code stuff Apex Outlet Setup \\ Error: Expected ON or OFF OR PFx //Error: line 1 - Set Wave1 PF1 \\ Error: Expected ON or OFF OR PFx //Error: line 2 - If Time 1:00 to 1:59 Then duskdawn \\ Error: Expected ON or OFF OR PFx //Error: line 3 - If Time 2:00 to 21:00 Then Wave1 \\ Error: Expected ON or OFF OR PFx //Error: line 4 - If Time 21:01 to 22:00 Then duskdawn \\ Error: No such outlet name //Error: line 5 - If Outlet Timer = ON Then Flush1 \\ Error: Expected ON or OFF OR PFx //Error: line 6 - If Time 22:01 to 12:59 Then Night __________________ 220 gallon Planet Aquarium RR tank, 40gal Trigger Systems sump, Geisemann Infinity 72" Current Tank Info: 90 gallon SPS reef W/ 30 gal sump / refuge :P

07/30/2011, 12:36 PM	#32
Toomnymods Registered Member Join Date: Jun 2002 Location: Grand Prairie, Tx. Posts: 640	i tried again and still keep getting 6 lines of error codes.. wish they had a dummy proof way of doing this without having to be a computer programmer to under stand it __________________ 220 gallon Planet Aquarium RR tank, 40gal Trigger Systems sump, Geisemann Infinity 72" Current Tank Info: 90 gallon SPS reef W/ 30 gal sump / refuge :P

05/11/2011, 10:51 AM	#27
mayolobeis Registered Member Join Date: Jul 2010 Location: mexico df Posts: 3	hi good afternoon I wonder if you can put some pictures of the connections on your driver pumps'm thinking about buying a Tunza apex but I have my doubts as to connect greetings grattings

08/08/2011, 08:19 AM	#33
Aquattro Registered Member Join Date: Mar 2008 Location: Canada Posts: 256	Great thread, looking for something like this. Interesting idea, both pumps at one end of tank. You don't find you get any dead spots? Currently I'm running a 6100 from each rear corner of my 180, and feel I can do more with these pumps. I'll try to replicate your config, although any starting point you can recommend for a 6' tank might help

08/08/2011, 09:48 AM	#34
aquamanic WHO DAT?? Join Date: Sep 2009 Location: Baton Rouge, LA Posts: 5,709	Remember that both profile and outlet names are case sensitive. Check that and see if it helps. __________________ I don't work for Neptune. Please put all questions into forum posts and not PM's. Visit the Neptune Community Forums for the latest Neptune updates - forum.neptunesystems.com

08/08/2011, 09:54 AM	#35
doctorgori Moved On Join Date: Jun 2011 Location: Simon Bar-Sinistar Posts: 1,097	sincere appologies for the similar/duplicate new topic (mine is a lil broader in scope), I had no way of knowing....we could combine the two, is there a way?....

08/18/2011, 03:03 PM	#36
jeffreylam1132 Registered Member Join Date: Jan 2004 Location: Rosemead, CA Posts: 2,658	Very helpful program, Scott. Thanks!

08/27/2011, 12:59 AM	#37
jeffreylam1132 Registered Member Join Date: Jan 2004 Location: Rosemead, CA Posts: 2,658	How do I program the timer? Is it located in the outlet setup or the profile setup? I'm looking through the apex web page and I don't see anywhere to program these: Timer1 (turns on every 120 minutes for 10 minutes. If timer 2 is on at that time, it should remain off. OSC 120:00/010:00/000:00 Then ON If Outlet Timer2 = ON Then OFF If Time 19:30 to 11:30 Then OFF If FeedA 000 Then OFF Timer2 (turns on every 45 minutes for 15 minutes except if timer 3 is on) OSC 045:00/015:00/000:00 Then ON If Outlet Timer3 = ON Then OFF If Time 19:30 to 11:30 Then OFF If FeedA 000 Then OFF Timer3 (turn on every 15 minutes for 5 minutes except if timer 1 is on) OSC 015:00/005:00/000:00 Then ON If Outlet Timer1 = ON Then OFF If Time 19:30 to 11:30 Then OFF If FeedA 000 Then OFF

08/27/2011, 06:08 AM	#38
aquamanic WHO DAT?? Join Date: Sep 2009 Location: Baton Rouge, LA Posts: 5,709	Select 'Advanced' for the outlet type, then enter the program statements manually. __________________ I don't work for Neptune. Please put all questions into forum posts and not PM's. Visit the Neptune Community Forums for the latest Neptune updates - forum.neptunesystems.com

09/06/2011, 03:15 PM	#39
ebacon Registered Member Join Date: Dec 2004 Location: St Charles Mo Posts: 1,084	so to be clear the 3 timers are virtual, still controlling the 2 var tunze's? 2 questions: 1) can you show what prgramming changes might be needed as my lights are on a RT+ 00:00 cycle 2) I am trying to incorporate this program using 2 large korala's (on or off) a maxijet, and a 6200 programable tunze.... Any suggestions?: __________________ Everybody Loves Bacon

12/14/2011, 07:29 PM	#40
ostrow It's Dr. Goodluck Himself Join Date: Oct 2002 Location: Oak Park, IL Posts: 11,654	It took me forever to shoot the videos. Sorry. Here's video on my 5' tank. If I set on an d off both at 3, the wave is so big water splashes out of the tank. I figure even with it as it is, the stress on the glass might not be worth it but it is so cool.... __________________ It's the return of Dr. Goodluck Himself. fml! Current Tank Info: 156G "brick", 150 sump and 75 fuge replaces Fire, Destruction, Sad :(

12/24/2011, 10:31 AM	#41
Aquattro Registered Member Join Date: Mar 2008 Location: Canada Posts: 256	I just entered this set of profiles, and only got to see a bit of duskdawn before lights out (switch to night). This morning, lights on switched back to duskdawn, and all I have to say is that I need to make sure I'm home later today when Wave1 kicks in, or I might have a wet floor I'm using 2 6100s, one each end of my 180, mounted top rear corner. Also have a 6080 and a 6060 in the 2 front top corners. Even with this, and the lower flow of the duskdawn, I'm getting a noticeable wave and seeing some crud floating off the rock work into suspension. Great stuff!! Today is water change day, so I may move both 6100s to one end, and move the smaller fixed speed pumps to the opposite end, lower in the tank.

12/24/2011, 06:26 PM	#42
Aquattro Registered Member Join Date: Mar 2008 Location: Canada Posts: 256	Question, not so much Apex related as it is Tunze, but using this setup, I get a fair bit of squealing from the pump driver, apparently when it shifts profiles. Anyone have this issue, or is that more related to the pump itself? I think it's just one, so maybe it just needs a good cleaning?

04/07/2012, 03:13 PM	#43
jefftse Premium Member Join Date: Oct 2007 Location: Baltimore, MD Posts: 189 Blog Entries: 2	I tried to setup 3 timers. timer 1 and 2 were used base_var1 and base_var2. how can I change the outlet type? I don't have anymore base_var left and the next one is the base_alarm. Please advise

04/09/2012, 05:37 AM	#44
yachtdr22 Registered Member Join Date: Mar 2002 Location: corpus christi, tx Posts: 488	Greetings all... Seeking advice... Looking for new flow system in my 125gal mixed reef (72x18x22) w/ RKL system Vortech MP40 or 2) MP10's Tunze ??? Advice?

04/22/2012, 08:09 AM	#45
Aquattro Registered Member Join Date: Mar 2008 Location: Canada Posts: 256	After using the OP's profile setup, I've been very happy with the water movement. I've just got a good deal on 2 6055 pumps, and I'm wondiring if anyone has incorporated additional pumps controlled by the Apex into this scenario. Should I attempt to enhance the wave motion, and if so, how? Or should I simply use a different set of profiles to move water? Any samples would be great...

04/26/2012, 06:48 PM	#46
earraval Registered Member Join Date: Feb 2004 Location: Brazil Posts: 82	hi guys, I would like a simple program like: left tunze runs for 2 min and stop for 30 sec for 3 hours; right tunze runs for 2 min and stop for 30 sec for 3 hours and so on..... Can anyone help me here? tks..... __________________ Ed Current Tank Info: 1000Lt Tank, Deltec 702, Mazzara Led, Apex Controller, Littermeter pumps.....

04/27/2012, 09:22 AM	#47
Dave & Monica Registered Member Join Date: Apr 2006 Location: Aurora, CO Posts: 1,255	I found the actual Neptune Apex manual to be very helpful with this type of configuration. I'm still setting up and configuring my Tunze 6095's so am not well versed to just program from memory, good luck though.

04/27/2012, 06:22 PM	#48
ecook280 Registered Member Join Date: Jul 2011 Location: Ravenna Ohio Posts: 67	Got a pair of 6105's and used this basic setup, works great, thanks for sharing !!!

05/02/2012, 05:04 AM	#49
Dave & Monica Registered Member Join Date: Apr 2006 Location: Aurora, CO Posts: 1,255	Yea - This thread helped a lot, this is what I ended up with: http://www.reefcentral.com/forums/sh....php?t=2162152

06/20/2012, 09:03 PM	#50
cbenner Registered Member Join Date: Feb 2012 Posts: 17	Thanks so much for this thread. I have had my Apex for a few months and just started controlling my Tunzes with it. I was having a rough time understanding how the profiles work, but after working with this I feel like i have a handle on it. I love the controller and feel that it is worth every penny I spent on it. Thanks Again Cheers Chris

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tunze setting	cubber	Tunze	1	01/01/2007 04:39 PM
220 Tunze set up...please advise	jjj1100	Tunze	4	02/24/2006 12:42 PM
Lets See Those TUNZE Set-ups!	Sindjin	Reef Discussion	21	01/20/2006 04:09 AM
Considering A Tunze Set-up	Maldivan	Tunze	2	10/13/2004 08:00 AM