|
02/06/2018, 09:14 AM | #1 |
Registered Member
Join Date: Mar 2011
Location: etiwanda, ca
Posts: 225
|
6105 not working in controller mode
Just replaced my 6095s with a pair of brand new 6105s last night.
I connected everything to my GHL Profilux III controller as before. 1 works fine. the other does not work in controller mode, but works in other modes. I'm assuming this means tll the cables are working OK in this situation? Please help. |
02/06/2018, 03:05 PM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
I assume by controller mode you mean external mode? One possibility would be the cable but then it should work if you switch cables between the pumps. The other thing I have seen but not common is that a 7090 (built in controller) has a bad DIN connector, in that case if you swap the controller that pump should work. The pump can be unplugged from the controller inside, the manual explains how.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|