9410 skimmer magnet mod.

moondoggy4 · 08/29/2017, 01:15 AM

I have an older 9410 with the brackets and I was wondering if I could use some of my old magnets from my 6025 pumps. Does it matter which side of the magnet goes in the water. Some of my magnets are the older style and some are the newer style.

rvitko · 08/29/2017, 08:53 AM

9410 or 9010? The 9410 just sits on its base, no rail or magnet. 9010 would need the old style H magnets which I do have.

moondoggy4 · 08/29/2017, 11:33 AM

https://www.googleadservices.com/pag...9A4IlQE&adurl= This style it also has the in sump kit. I was thinking about using it on my 120 tank. I am not sure if I can get my sump deep enough for it. Thanks Roger

Sorry my links does not work it is a ComLine Doc 9010 skimmer

rvitko · 08/29/2017, 11:37 AM

With the sump kit you won't need a magnet, it will just stand on the bottom, the right magnet is 6080.500.

moondoggy4 · 08/29/2017, 11:50 AM

So do you glue the magnet to the skimmer? Or do they attach to the rail system?

Side not my old 6080.500 one of the magnet is bulged can you leave that side out of the tank and still use the magnet?

This is a ComLine Doc 9010 skimmer.

rvitko · 08/29/2017, 01:03 PM

That will work with the 6080.500, the magnet clicks on to the tabs and locks on the same way the rails did.

08/29/2017, 01:15 AM	#1
moondoggy4 Registered Member Join Date: Jan 2007 Location: menifee So cal Posts: 11,042	9410 skimmer magnet mod. I have an older 9410 with the brackets and I was wondering if I could use some of my old magnets from my 6025 pumps. Does it matter which side of the magnet goes in the water. Some of my magnets are the older style and some are the newer style.

08/29/2017, 08:53 AM	#2
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 35,785	9410 or 9010? The 9410 just sits on its base, no rail or magnet. 9010 would need the old style H magnets which I do have. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish

08/29/2017, 11:37 AM	#4
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 35,785	With the sump kit you won't need a magnet, it will just stand on the bottom, the right magnet is 6080.500. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish

08/29/2017, 01:03 PM	#6
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 35,785	That will work with the 6080.500, the magnet clicks on to the tabs and locks on the same way the rails did. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish

08/29/2017, 11:33 AM	#3
moondoggy4 Registered Member Join Date: Jan 2007 Location: menifee So cal Posts: 11,042	https://www.googleadservices.com/pag...9A4IlQE&adurl= This style it also has the in sump kit. I was thinking about using it on my 120 tank. I am not sure if I can get my sump deep enough for it. Thanks Roger Sorry my links does not work it is a ComLine Doc 9010 skimmer

08/29/2017, 11:50 AM	#5
moondoggy4 Registered Member Join Date: Jan 2007 Location: menifee So cal Posts: 11,042	So do you glue the magnet to the skimmer? Or do they attach to the rail system? Side not my old 6080.500 one of the magnet is bulged can you leave that side out of the tank and still use the magnet? This is a ComLine Doc 9010 skimmer.