|
03/08/2018, 07:16 AM | #1 |
Registered Member
Join Date: Feb 2016
Posts: 71
|
Tunze controller choice
110 gallon tank. I'm thinking about using 4 Tunze powerheads (2x 6095 and 2x 6055) on lower power setting (around 60%). I want temperature control and i want to dose 3 elements (Kh, Mg, Ca).
Is there a Tunze controller that can handle all this. Which doser is best to go with this controller? |
03/08/2018, 08:45 AM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
At this time the 7000 has no capability for dosing, the timed outlets only allow 2 on and off times.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
03/08/2018, 02:35 PM | #3 |
Registered Member
Join Date: Feb 2016
Posts: 71
|
So if i go with 7097 controler, i can connect all 4 pumps on it and control them?
Is 7097 better then 7096 jist because of the internal clock or does it have any other improvement? Internal clock is probably good if i want to reduce the flow during night? |
03/08/2018, 02:48 PM | #4 |
Registered Member
Join Date: Feb 2016
Posts: 71
|
If i understand correctly 7000 model can control 4 pumps and can measure water temperature at the same time? 7097 doesnt have water temperature feature?
|
03/08/2018, 03:36 PM | #5 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Yes, 7097 or 7000 can control 4 pumps. 7000 has temp and pH control as well.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
Thread Tools | |
|
|