|
05/23/2014, 06:34 PM | #1 |
Registered Member
Join Date: Aug 2009
Location: Minooka Il
Posts: 912
|
Low salinity and Sps ?
What is considered low and what will it do? I have had some Coral receding at the base and tips at times. I was doing a w/c and I always mix to 1.025. When I checked the dt it was at 1.022 & it might have been 1.021. I can't believe I over looked something so simple. I'm not sure how long it might have been like this.
|
05/23/2014, 10:09 PM | #2 |
Registered Member
Join Date: Sep 2006
Location: Wildwood, MO
Posts: 393
|
1.021 is pretty low. I keep mine at 1.026 I think most people keep their SPS a little higher.
__________________
Current Tank: 90RR mixed reef, 150gal additional volume, 40gal sump, algae reactor, ASM G-3 skimmer, 3 - modified Marsaqua Led Units 2- 165w 1- 300w, Kalwasser reactor ATO, Auto Dosing 3 part plus tra |
05/23/2014, 10:32 PM | #3 |
Registered Member
Join Date: Jun 2006
Location: Surprise Arizona
Posts: 915
|
I run at 35-36 ppt which is about 1.026 to 1.028
__________________
Why is this so addictive. Current Tank Info: You want to know just ask |
05/23/2014, 10:32 PM | #4 |
Registered Member
Join Date: May 2012
Location: Grand Rapids
Posts: 18
|
Sps
I would do daily wc and bump up the salitity up to 0.026 and do it over a week span to get to about 0.024 or 25. I believe that if it was gradually increased and raised to 0.021 or 22, you should see less PE but not RTN or STN. Just my opinion but did you have a huge swing or you may want to look at other factors. I have personally kept SPS at 0.022 with little PE and no growth but still alive. I have also burnt tips when getting up to 0.029. I would check for AEFW. This is just my 2 cents.
|
05/24/2014, 12:11 AM | #5 |
Registered Member
Join Date: Aug 2009
Location: Minooka Il
Posts: 912
|
The only thing I can think of is every time I emptied my collection cup I never really acounted for it. I have never had this happen before . I dipped a couple of weeks ago with Bayer and found no pests. I just went through a frag get some colonies because of them stn/rtu from the base up. I hope this is why they are doing that so at least I have a solution.Usually I'm at 1.025 .
|
|
|