|
11/16/2017, 01:20 PM | #1 |
Registered Member
Join Date: Feb 2016
Location: England, Earl Shilton
Posts: 1,452
|
Mesh tank lid securing help
Hello I bought a mesh and frame tank lid kit and it looks ok but it only rests on top of the tank with no fittings to secure it.
I'm using a couple bits of tape to hold it at the sides because I have a firefish in there and she darts around and probably could easily shift it. It's only a holding tank so it doesn't need to be perfect but want some better than tape. Any ideas? https://www.dropbox.com/s/vnvmowbasj...91045.jpg?dl=0 https://www.dropbox.com/s/wz5mykk6jk...91035.jpg?dl=0 Thanks |
11/16/2017, 04:17 PM | #2 |
Registered Member
Join Date: Sep 2015
Posts: 153
|
|
11/17/2017, 09:30 AM | #3 |
Registered Member
Join Date: Feb 2011
Location: Bloomingdale, IL
Posts: 326
|
You would have to re-do the screen top if it is resting on top of the tank and not sitting in the perimeter if you want to use those tabs recommended above. I made tabs similar by buying a think acrylic and using a heat gun to bend small tabs around a wood mold. Cost like $3 and took 20 minutes to do.
|
11/17/2017, 12:03 PM | #4 |
Registered Member
Join Date: May 2003
Location: Anaheim, CA
Posts: 6,902
|
I printed screen connectors/corners on my 3d printer that have an lip on them to go around the outside edge to keep the screen in place.
__________________
240G mixed reef, 29G SPS/LPS clam tank, 50G mixed reef Current Tank Info: 300g mixed reef, 50g cube |
11/17/2017, 05:57 PM | #5 |
Registered Member
Join Date: Apr 2002
Posts: 1,076
|
|
11/17/2017, 10:35 PM | #6 |
Registered Member
Join Date: May 2003
Location: Anaheim, CA
Posts: 6,902
|
Sure, I will have to find it.
__________________
240G mixed reef, 29G SPS/LPS clam tank, 50G mixed reef Current Tank Info: 300g mixed reef, 50g cube |
11/18/2017, 11:27 AM | #7 |
Registered Member
Join Date: Sep 2017
Posts: 16
|
|
11/18/2017, 12:05 PM | #8 |
Registered Member
Join Date: Apr 2002
Posts: 1,076
|
|
11/19/2017, 04:24 AM | #9 |
That Guy
Join Date: Sep 2011
Location: New Braunfels, TX
Posts: 457
|
Anytime I see someone post about a lid thing, I try to refer them to artfullyacrylic; website http://artfullyacrylic.3dcartstores.com/
They sell an amazing product and it looks great... just takes a few weeks to custom make. Price is great for what you get. |
11/19/2017, 01:45 PM | #10 |
Registered Member
Join Date: Dec 2014
Location: Tucson, AZ
Posts: 286
|
I have an acrylic tank and I affixed two half-inch by half-inch Rods the entire width of the tank, one along the front of the tank and one on the back on the top. My screens fit very tight in between. I have fire fish and tile fish who are all big jumpers and they cannot get out.
|
11/19/2017, 02:38 PM | #11 |
Registered Member
Join Date: May 2003
Location: Anaheim, CA
Posts: 6,902
|
__________________
240G mixed reef, 29G SPS/LPS clam tank, 50G mixed reef Current Tank Info: 300g mixed reef, 50g cube |
|
|