Setup 75Gallon Sea horse tank

term_paint · 10/05/2017, 06:50 PM

I have a quick question. My tank is a typical 75 which is 4 foot long. I am going to install two 240 hydro power heads which means i will get the rest of the flow from the return pump. Current efulx dc pump and i can control the flow. But my question is i am thinking about putting a spray bar on the return line. Anyone have any info on the size of the holes that would be need? Thanks.

btreyes · 10/06/2017, 04:48 PM

I just made a spray bar and it has made a huge difference for feeding my horses by keeping the mysis in suspension. I just drilled about every inch and used a 3mm drill bit. The first one that I made was far too strong, so I attached a less powerful pump and it is working great.

10/05/2017, 06:50 PM	#1
term_paint Registered Member Join Date: Jan 2008 Location: Kannapolis, Nc Posts: 96	Setup 75Gallon Sea horse tank I have a quick question. My tank is a typical 75 which is 4 foot long. I am going to install two 240 hydro power heads which means i will get the rest of the flow from the return pump. Current efulx dc pump and i can control the flow. But my question is i am thinking about putting a spray bar on the return line. Anyone have any info on the size of the holes that would be need? Thanks.

10/06/2017, 04:48 PM	#2
btreyes Registered Member Join Date: Jun 2011 Posts: 190	I just made a spray bar and it has made a huge difference for feeding my horses by keeping the mysis in suspension. I just drilled about every inch and used a 3mm drill bit. The first one that I made was far too strong, so I attached a less powerful pump and it is working great.