|
08/03/2020, 07:50 AM | #1 |
Registered Member
Join Date: Sep 2007
Location: Waddell AZ
Posts: 696
|
watson marlow peristaltic pump for ca rx
I am looking for a peristaltic pump for my geo 618. I have come across a watson marlow 405U/R1 on ebay and was wondering is this would fit my need.
Features: Single ChannelFlow Rate of 0.44 to 610mL/min. Speed Control Ratio of 10:1 Minimum Speed of 20rpm Maximum Speed of 200rpm Can be remotely controlled Electrical Requirements of 110/120V 60Hz If anyone has any other recommendation I am open to suggestions.
__________________
hobby???? are you serious this is an ADDICTION |
08/03/2020, 08:31 AM | #2 |
Registered Member
Join Date: Nov 2002
Location: Miller Place, NY
Posts: 7,206
|
Watson Marlow is a good pump but 44 ml/min could be too much for the low speed.
__________________
250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps. |
08/03/2020, 10:22 AM | #3 |
Ver. 2.1
Join Date: Mar 2005
Location: Rehoboth, MA
Posts: 1,803
|
I looked up spec, the flow rate is 0.44 to 610 ml/min.
That should be low enough. Specifications Model 405U/R1 Channels 1 Shipping Weight (English) 7.7 lb. Storage Requirements (English) -40°F to +158°F Certifications/Compliance CE, BS0800, IEC335-1, EN60529 Electrical Requirements 110/120 V 60 Hz Voltage 110/120 V Frequency 60 Hz Temperature (Metric) Max 40°C Temperature (English) Min 41°F Flow Rate 0.44 to 610 mL/min. Motor Type Reversible Shipping Weight (Metric) 3.5 kg Storage Requirements (Metric) -40°C to +70°C Noise Level <70 dB (A) Reversible Yes Enclosure Rating IP21 Wipedown Temperature (English) Max. 104°F Temperature (Metric) Min. 5°C
__________________
Pete "I never make mistakes... I thought I did once, but I was wrong" Current Tank Info: In the process - http://reefcentral.com/forums/showthread.php?t=2661614 |
|
|