|
|
|
04/02/2019, 05:50 PM
|
#1 |
|
Registered Member
Join Date: Aug 2002
Location: Lakewood Ranch Fl.
Posts: 872
|
multicontroller issue
Roger, I have four 6105's on a 7095 controller. I just picked up all new MIDI cables and for some reason I can only get three pumps to work at a time at least for more then 30 mins. If I turn the power off for a few minutes when I turn it back on a different 3 pumps will work. Is it time for a new controller?
__________________
Living it up in Florida Current Tank Info: 210 gal, 300lbs LR, Aquamaxx Skimmer, 3x Reefbreeders LED's & T5's. |
|
|
|
04/03/2019, 09:08 AM
|
#2 |
|
RC Sponsor
 
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
What mode are you in, could I get a photo of the settings you are using? Have you tried swapping out the cable that doesn't work with one that does? This could just as easily be the pump, the cable or the setting, for example sequential mode the pumps come on in sequence at a time delay. Pulse mode and Interval 2 are the only modes where all 4 pumps always run. In general the 7095 is really robust, the only failures I usually see are a dead food time, dead photocell and a water damaged outlet.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|
|
 |
|
|
