|
12/16/2017, 05:37 PM | #1001 |
Registered Member
Join Date: Jan 2002
Location: MI
Posts: 189
|
Figured it out.... nice job on the calibration. That is much easier than trying to stop pump at a specific amount.
Only issue I experience is if I disconnect, kore 5the screen goes wacko. I just close the app and it seems fine. I will be watching parameters closely for the next couple days. I switched over to ATI essentials and need to figure out how much to set at...
__________________
Truepercs... |
12/16/2017, 06:41 PM | #1002 |
Registered Member
Join Date: Jan 2002
Location: MI
Posts: 189
|
Has anyone used android app along with an app on another operating system?
Back and forth? First time I experimented with the android app somehow in the custom settings Friday was deselected on the Mac version of the pump used for ALK. I caught it since I check ALK each day. I am not going to use the mac app if this version works. Is it possible to change pump speeds as in the mac/windows versions? Thx
__________________
Truepercs... |
12/17/2017, 08:47 AM | #1003 |
Registered Member
Join Date: Aug 2015
Location: Poland
Posts: 652
|
Hi
In Android app there is no option for changing motor speed - however since we are including highest quality charmed BPT tubings - it's not needed. Even on fast speed doser is ultra precise(offer much better resolution than any other dosing station on market). But this Pharmed tubings REQUIRE fast speed - on moderate or precise rollers sometimes not spin and dosed amounts aren't consistent. In next firmware release(which will be compatible with Kore 7th also) that option will be removed from software and firmware(it caused too many reports from Customers which tried to use Pharmed tubings but with precise speed - which is not needed for that kind of tubings). Built in algorithms allow to dose single liquid drops even on fast speed using Pharmed tubing. We got few reports about LCD screen strange letters after disconnecting - it should be fixed in nearest update(its not a bug in each doser - some dosers working inside cabinets where is strong EMC field "collect" some magnetic trash from air and thats responsible for this effect). Regards Przemek |
12/17/2017, 08:49 AM | #1004 | |
Registered Member
Join Date: Aug 2015
Location: Poland
Posts: 652
|
Quote:
yes, manual is available there: http://pacific-sun.eu/shop/dosing-st...#tab-downloads and direct link: http://pacific-sun.eu/pliki/Kore5th_manual.pdf Regards Przemek |
|
12/17/2017, 01:37 PM | #1005 |
Registered Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
|
Przemek, I have always used the windows interface for calibration, and that's covered in the manual you linked to.
The android app appears different, and is not covered in the manual. How does one calibrate using the app. I would prefer to use the app as it's an easier to use(mobile always within arms reach, while laptop needs to be dragged out, started up, etc, etc).
__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256 Originally posted by der_wille_zur_macht: "He's just taking his lunch to work" |
12/17/2017, 05:13 PM | #1006 |
Registered Member
Join Date: Jan 2002
Location: MI
Posts: 189
|
Homer it was pretty easy. (actually easier than what I was doing for calibration)
Choose desired pump-Select calibration, doser pumps fluid into your measuring container. Measure how much liquid was despensed,(visual markings on container) input this value, then save calibration. You can then "check calibration" it should fill the container with the same amount again. (i did process twice) Go into the actual pump settings and manually dose into the measurement container to see if dose was correct. (i.e. set dose to 10ml doser should dispense 10 ml...) Calibrate each pump. It worked very good...
__________________
Truepercs... Last edited by truepercs; 12/17/2017 at 05:29 PM. |
12/17/2017, 05:28 PM | #1007 | |
Registered Member
Join Date: Jan 2002
Location: MI
Posts: 189
|
Quote:
Przemek, FYI...My Kore 5th is in a cabinet... (only piece of electrical equipment in cabinet) -Ed
__________________
Truepercs... |
|
12/17/2017, 05:49 PM | #1008 | |
Registered Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
|
Quote:
That is easier then using the windows UI.
__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256 Originally posted by der_wille_zur_macht: "He's just taking his lunch to work" |
|
12/18/2017, 04:53 AM | #1009 |
Registered Member
Join Date: Jan 2007
Location: Puerto Rico
Posts: 838
|
Seems that the new firmware and software is pretty stable... Will give it a try to see how it goes.
Thanks for any feedback.
__________________
125 Gal. Reef Tank, Skimmer SRO-1000SSS (Old), Aquamaxx EM-200, Chiller Artica 1/4, BRS GFO/Carbon Reactor, Sunpower 6x80 Watt., Actinic ReefBrites, 2 Jebao RW-15, 3/4 Sea Swirl, HY-5000 Return Pump, Current Tank Info: 125 Gal. Reef, Chiller 1/4, Skimmer SRO SSS-1000 (Old), Aquamaxx EM-200, Aqua C UV, Actinic ReefBrites, Kore 5th. Doser, APEX Full |
12/25/2017, 05:10 AM | #1010 |
Registered Member
Join Date: Apr 2017
Location: UK
Posts: 19
|
|
01/20/2018, 10:31 AM | #1011 | |
Registered Member
Join Date: Jan 2007
Location: Puerto Rico
Posts: 838
|
Quote:
I have a Blank Screen now and tried the Firmware process with no luck. Thanks in advance...
__________________
125 Gal. Reef Tank, Skimmer SRO-1000SSS (Old), Aquamaxx EM-200, Chiller Artica 1/4, BRS GFO/Carbon Reactor, Sunpower 6x80 Watt., Actinic ReefBrites, 2 Jebao RW-15, 3/4 Sea Swirl, HY-5000 Return Pump, Current Tank Info: 125 Gal. Reef, Chiller 1/4, Skimmer SRO SSS-1000 (Old), Aquamaxx EM-200, Aqua C UV, Actinic ReefBrites, Kore 5th. Doser, APEX Full |
|
01/20/2018, 11:24 AM | #1012 |
Registered Member
Join Date: Aug 2015
Location: Poland
Posts: 652
|
@wcharon
Procedure is the same - you need use dedicated software for update(not control software even if it have upload firmware button!) and press reset switch on doser after you will choose firmware to upload( "dots" are showing on app screen...)
__________________
Home for Advanced Technology... www.Pacific-Sun.eu |
01/20/2018, 11:27 AM | #1013 |
Registered Member
Join Date: Jan 2007
Location: Puerto Rico
Posts: 838
|
happy New Year Prezmek. Hope everything is OK....
I will shoot you a PM.
__________________
125 Gal. Reef Tank, Skimmer SRO-1000SSS (Old), Aquamaxx EM-200, Chiller Artica 1/4, BRS GFO/Carbon Reactor, Sunpower 6x80 Watt., Actinic ReefBrites, 2 Jebao RW-15, 3/4 Sea Swirl, HY-5000 Return Pump, Current Tank Info: 125 Gal. Reef, Chiller 1/4, Skimmer SRO SSS-1000 (Old), Aquamaxx EM-200, Aqua C UV, Actinic ReefBrites, Kore 5th. Doser, APEX Full |
01/20/2018, 11:29 AM | #1014 | |
Registered Member
Join Date: Aug 2015
Location: Poland
Posts: 652
|
Quote:
We noticed some delays a specially with parts suppliers :-( But now everything is fine - we are on last stage and our IT team do last software updates (to prepare Kore 7th to control class type calcium reactors ;-) So general informations about Kore 7th: - wireless dosing station with 7 separate dosing channels. Virtual bottles(low capacity alarms), precision up single drop!(important for Korallen Zucht/Aquaforest users where some liquids are calculated in drops/100 liters) - digital temperature sensor - 2pH electrode ports - which allow several configure options like: a) 1 pH for controlling calcium reactor(it's dosing co2 using solenoid valve like in Kore 5th) - second for tank measure and alarm for too low pH in tank b) 1 pH for controlling calcium - second to work with kH Lab for alkalinity measure and adjusting(by turning on/off solenoid in calcium reactor) ... - automatic water change with dedicated DC AWC module(or 2 channels in doser) - work with magnetic stirrer - mix liquids before the dose(like coral foods etc) and many other options which will be explained/described in product manual.. We expect that product will be available for orders in next week - before endow January at least.. BR Przemek
__________________
Home for Advanced Technology... www.Pacific-Sun.eu Last edited by Przemek_PacSun; 01/20/2018 at 11:37 AM. |
|
02/02/2018, 04:24 PM | #1015 |
Acro Addict
Join Date: Jan 2003
Location: Maine
Posts: 598
|
Latest firmware is very fast and stable! I'm using a tablet, I'm able to secure a solid connection with the doser from about 15 feet away through a wall and the tank cabinet... very happy with this update.
__________________
Back to halides and loving it! Current Tank Info: 180g sps dom, 40b sump, Reeflo Dart, Apex, Aquamaxx co2, Reefbrite mh/led pendants w/14k twinarcs, Kore 5th doser, Tunze ATO, Ranco controlling 800 watt Finnex tube, 2 Maxpect Gyre 150XF with Ice Cap Controllers and battery backup, Bean Animal drain |
02/02/2018, 06:20 PM | #1016 |
10 & Over Club
Join Date: Feb 2000
Location: Minneapolis,mn
Posts: 339
|
doser will not shut off
I was calibrating pump#2 for the first time today as I was setting up for the first time and the screen went blank and the pump stayed running after 10min I unplugged the unit waited 5 min and plugged it back in.The screen flashed a bootloader message and then the time for a brief second and the screen then went blank and pump #2 runs continually I tried the reset button but it does the same thing and I can no longer connect to the doser via Bluetooth. What do I do?
|
02/02/2018, 06:28 PM | #1017 |
Registered Member
Join Date: Jan 2007
Location: Puerto Rico
Posts: 838
|
I had to go back to previous version as when i changed pump settings it wasn't retaining the settings.
Reported to PS and they are working with a new version.
__________________
125 Gal. Reef Tank, Skimmer SRO-1000SSS (Old), Aquamaxx EM-200, Chiller Artica 1/4, BRS GFO/Carbon Reactor, Sunpower 6x80 Watt., Actinic ReefBrites, 2 Jebao RW-15, 3/4 Sea Swirl, HY-5000 Return Pump, Current Tank Info: 125 Gal. Reef, Chiller 1/4, Skimmer SRO SSS-1000 (Old), Aquamaxx EM-200, Aqua C UV, Actinic ReefBrites, Kore 5th. Doser, APEX Full |
02/02/2018, 09:36 PM | #1018 |
10 & Over Club
Join Date: Feb 2000
Location: Minneapolis,mn
Posts: 339
|
I am running the version that came with the unit. I need instructions to calibrate pumps as the manual does not match the software.
|
02/03/2018, 07:37 AM | #1019 |
10 & Over Club
Join Date: Feb 2000
Location: Minneapolis,mn
Posts: 339
|
I can not find where you can download firmware updates, I can get to the software downloads and firmware update tool but where do you actually download the firmware files?
I am running Mac OSX version 1.7.96 software, when I try to calibrate it come with a pop-up box saying calibration started but nothing happens until I press the ok or return button. Sometimes the return button will result in the dosing pump selected outputting 4.5 ml of water sometimes not sometimes selecting the OK button will result in a 4.5 ml dose sometimes not. The stop calibration dialog never comes on and if I try to enter 4.5 ml as the dosed amount it accepts it and says calibration data saved but when I try to manually dose 20 ml the output will vary between 14ml and 19 ml. How do I get to a usable unit that I do not have to live in fear of overdoses and other random meaningless acts of dosing errors due to the inability to calibrate the pumps? It seems bizarre that you cannot have the app load the current doser settings without having to push several read buttons on each page literally you need to push 20 buttons to get the whole config loaded in the app with the OSX software LOL. Last edited by watsonj; 02/03/2018 at 09:25 AM. |
02/04/2018, 07:09 AM | #1020 |
10 & Over Club
Join Date: Feb 2000
Location: Minneapolis,mn
Posts: 339
|
Przemyslaw thank you for the quick response via customer support on a weekend, it looks like I could have the wrong tubing installed for slow speed dosing going to get back home and check this morning and try again I just need to solve for the scrabbled screen after calibration that requires a reeboot after that.
|
02/04/2018, 08:20 AM | #1021 |
10 & Over Club
Join Date: Feb 2000
Location: Minneapolis,mn
Posts: 339
|
Well that did not work I calibrate enter the value and it save but when I try to manual dose an amount it is incorrect but consistent I could play with the calibration amount to enter and get to the desired amount by trial and error but I would have no confidence in the dosed amount being consistent. when I dose 20 ml manually I result in a 19ml dose. I tried all speeds with both types of tubing with the same result.
|
02/04/2018, 09:12 AM | #1022 |
10 & Over Club
Join Date: Feb 2000
Location: Minneapolis,mn
Posts: 339
|
I reloaded software and it looks like issues solved.
|
02/04/2018, 10:11 AM | #1023 |
Registered Member
Join Date: Sep 2007
Posts: 46
|
Hi,
I have been using the Kore. Last year it stopped dosing for some issue http://www.reefcentral.com/forums/sh...&postcount=731 A couple of weeks ago I had another issue. It was not dosing at all. My corals have suffered a lot with low KH values untill I realised that the time on the display was frozen at 11:04. But the doser knew about the time and could dose with the application. I have loaded the latest firmware and windows application. There is always the same issue with this doser, I have to use a firmware that is only a few days old. Why you do not make stable versions? I am expecting something very simple from the doser. The new application works much worse for me than the old one: continuous freezing, I can only change a channel at a time. It is not possible to set channels to OFF. Some errors messages talk about a lamp, when I have a dosing pump, the display gets frozen, etc. With all the errors I have uploaded the latest firmware but with very small confidence on this software again. I am not confident that an error will happen in a few weeks or months as it has happened since I use the doser . I am always praying that the doser will not download the full KH canister in the tank killing everything. I am sorry to say this, but may be you have to make a simple reliable version that does not crash. Some pictures off the corals I have in the tank. I have a lot of effort put in this tank and cannot afford the frequent issues of the doser. This time KH dropped to 4,5 for some days. Same as with last issue. https://photos.google.com/share/AF1Q...9ZS1lpemdxTDl3 Sorry again for having to tell this, but a more stable solution has to be found. Probably the problem is comming for supporting so many external devices and operating systems. Chinese dosers with built in displays do not have these issues. Regards |
02/05/2018, 04:56 AM | #1024 |
Acro Addict
Join Date: Jan 2003
Location: Maine
Posts: 598
|
I notice with the new firmware/software that I can only update one pump at a time. The first time I changed my doser settings pump #1 was the only one that changed, even though I had checked pumped 1-4. Checking on a single pump at a time and updating works.
Sent from my iPhone using Tapatalk
__________________
Back to halides and loving it! Current Tank Info: 180g sps dom, 40b sump, Reeflo Dart, Apex, Aquamaxx co2, Reefbrite mh/led pendants w/14k twinarcs, Kore 5th doser, Tunze ATO, Ranco controlling 800 watt Finnex tube, 2 Maxpect Gyre 150XF with Ice Cap Controllers and battery backup, Bean Animal drain |
02/17/2018, 02:44 PM | #1025 |
10 & Over Club
Join Date: Feb 2000
Location: Minneapolis,mn
Posts: 339
|
I really like the magnetic stirrer and holder but I have been unable to find any 500 ml bottles that fit in the holes does anyone have some suggestions?
|
Tags |
junk trash |
Thread Tools | |
|
|