Reef Central Online Community
Marine Depot

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > General Interest Forums > Tank Journals & Builds
Register Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Old 09/14/2018, 10:05 AM   #1
KnightMetro
Registered Member
 
KnightMetro's Avatar
 
Join Date: Jul 2007
Location: Atlanta, GA
Posts: 130
5' of questionable decisions.

So the story begins. Well, it actually begins a decade ago but let's not get into that just yet.

After years in the hobby, with wavering dedication, I come upon the beginning of my first real mature reef build. My family just purchased our first home we intend to stay in for a while, so naturally, I am ignoring all the needed projects and jumping right into a built in reef tank.

I spent a lot of time staring at random walls, and gutting the basement, to finally settle on a wall in our kitchen that has no real purpose. It had a granite desk built in which holds no value to us, so out it goes.



The trick is that below this will be the utility and fish tank equipment room. It also sits against a load bearing wall and spans over 5 beams. So, I am confident of the home taking the weight with no issues.

Originally, I was eyeing a SCA 150g starfire on sale for $895. As many suggest, just get the tank you want up front or you will live to regret the foundation of everything else. That being said, I was seduced into buying a 120g off Craigslist right afterwards for $100.

I'm a whore for a good deal. That lasted about 2 days though.I recently moved back to ATL but was on a different side of the city and wanted to check out the LFS on my side of the world. I was a bit spoiled living a couple blocks from Pure Reef up in Alpharetta.

We went from store to store until I walked into one of the largest known in the area called Premier Aquatics. Great selection, great prices....and then they stole $900 bucks from me. What I mean by that is I stumble upon a fully established Red Sea 625XL. I stared at this thing for like 15 minutes and realized the real difference between a 4 foot tank and what that extra foot really gives you. I then spent the next 48 hours convincing my wife why the $100 tank in the back of my SUV wasn't going to cut it.

So, after a few e-mails to Steve over at SCA, I found myself ordering a custom tank.





It is a custom Starfire 5' tank drilled for two return and the Reef Synergy Shadow overflow. The eurbrace has been raised to be flush with the top and the overflow will mount almost flush to create a waterline of only about 1.7" below the top of the tank. I went ahead and added some depth as well because why not. They didn't even charge for the extra depth. If anyone is interested in the price, message me. Going custom was very minimal.

I'll stop here, because it's lunch time and I'm fat.

More to come.


KnightMetro is offline   Reply With Quote
Old 09/14/2018, 02:14 PM   #2
mr9iron
15& Over Club
 
mr9iron's Avatar
 
Join Date: Feb 2001
Location: Missouri
Posts: 2,601
Iím tagging along for the build.


Sent from my iPhone using Tapatalk


__________________
Vince
______________________________

Current Tank Info: Frag tank at the moment, planning another
mr9iron is offline   Reply With Quote
Old 09/14/2018, 02:55 PM   #3
tdlawdo
Registered Member
 
tdlawdo's Avatar
 
Join Date: Aug 2018
Posts: 28
Ditto!! Be right behind in the next couple of months with a 230 build


Sent from my iPhone using Tapatalk


tdlawdo is offline   Reply With Quote
Old 09/14/2018, 03:05 PM   #4
KnightMetro
Registered Member
 
KnightMetro's Avatar
 
Join Date: Jul 2007
Location: Atlanta, GA
Posts: 130
History and let the madness begin.

I have had a few tanks over the years but most were weak attempts mixed with moving too often and too many life changes to succeed.

Biocube 29, 14, 90g custom I never finished, and then a 120g I was really proud of that never got water in it(moved). I finally got a nice 30g rimless cube setup when I was in Alaska. I started to get some small automation going and it was OK for a while until a baby arrived.

Anyway, now that I can finally have all the excuses to do it right, here are my initial thoughts and research points.

- Fish room will be in the basement. I have never done this before but I have plenty of room in the 1,000sq ft space to carve out dedicated resources.
-Roller mat filtration. I am researching options. This is so new that it is hard to nail anything down in gen 1.
-The tank will be 40" base height and made to be viewed in the kitchen next to where an island will be installed with bar seating. Base will match bar height. top of tank will be at 64".
-Tank wall will be a textured wood wall made of distressed and shou sugi ban pine. Yeah, I play around with a bit of word working ideas of grandeur.

Example


Right now I am getting ready to cut out the tile and backer board on the floor for the space where the stand frame will sit. I'll be making the stand out of 3/4" plywood so I have a base I can make drawers into and cabinets. These won't be used for the tank, as the plumbing goes to the basement, but it will give us some extra storage in the kitchen.

I have about 40lbs of dry rock on the way from a supplier I got at $1.10lb so I can see what I'm working with. If I like it, I'll order a few more boxes and start playing around with aquascaping.

The tank is due to be in the SCA warehouse at the end of this month. I should have it here at home by mid October.


KnightMetro is offline   Reply With Quote
Old 09/17/2018, 09:43 AM   #5
KnightMetro
Registered Member
 
KnightMetro's Avatar
 
Join Date: Jul 2007
Location: Atlanta, GA
Posts: 130
I did some more work on the tank wall over the weekend. This should wrap up the demo and not I can start to design the frames, hood, and backsplash. On to the fun parts.



We spent all day Saturday going to the larger reef stores in Atlanta. I even had the chance to finally stop in to a place I have been shopping for the last 10 years. I haven't been in there since 2012 and they still remember the first tank I had. Incredible customer service and remarkable quality. They also continue to have fair pricing and am back on the top of my list for livestock and hardware.

We did learn some valuable price points over the weekend. There are some shops asking 100-200% higher than others, for no reason. A couple places to avoid unless they have something I must have. (You know how it goes)


KnightMetro is offline   Reply With Quote
Old 09/18/2018, 09:45 AM   #6
KnightMetro
Registered Member
 
KnightMetro's Avatar
 
Join Date: Jul 2007
Location: Atlanta, GA
Posts: 130
Happy Monday.

I got a few things done over the weekend with the tank wall. I made an access box on the left wall and rear wall so I can have an access panel to each side. These panels will give me access to the left side glass that will be against the wall. This will allow me to put a power head on the glass. Also, I'll have an access panel on the back to get to the Shadow overflow rear box as well as the back glass for any random future reasons.

Right now I am in research mode.

Since this is a from the ground up build, incorporating things I have never done before, in more room than I have ever had, I want to use to most up to date methods and incorporate them from the start.

Thinking out loud on ideas I am looking into.

-Triton method. Building the system around starting this discipline from the start.
-Roller mat filters. This is not needed in the Triton method, but I am still doing my research on this new product
-Power saving technologies.
-Apex controller
-Kessils A360x x3 with the 48" Aquatic Life T5HO hybrid fixture
-Protein Skimmer - Cloud 9 or Octo 202-S
-Maxspect Gyre

Sump design:

I have a new 40B that came with a full baffle kit for a fuge setup. I am actually thinking about getting another 40B and creating a dual 40B sump system. Where one flows into the other through some bulkheads. This will allow me to make a larger refugium and have a large area for the skimmer section and return. Plus, more water volume for whatever may end up added to the system. Like reactors, etc.


KnightMetro is offline   Reply With Quote
Old 09/20/2018, 09:06 AM   #7
neilp2006
Registered Member
 
Join Date: Oct 2015
Posts: 262
Awesome start to your build- Iím in suwanee and know the stores you are talking about- we have s few good ones around here.

Iím doing a 180 in Wall with a basement sump room. In fact- I just finished my scape and will be adding sand tomorrow.

I hate to solicit views, but that a look-

https://www.*********.com/threads/ne...shroom.390436/


Sent from my iPhone using Tapatalk


neilp2006 is online now   Reply With Quote
Old 09/20/2018, 09:30 AM   #8
KnightMetro
Registered Member
 
KnightMetro's Avatar
 
Join Date: Jul 2007
Location: Atlanta, GA
Posts: 130
I'll message you. We have some stuff to talk about. I've looked at your build thread a few times but I did not know you were in GA.

Thanks for dropping in.


KnightMetro is offline   Reply With Quote
Old 09/29/2018, 01:38 AM   #9
socalRW
Registered Member
 
Join Date: Sep 2018
Posts: 4
Wow, what a build! Your wife must love you — able to convince her to buy a whole nother tank after just buying one off of craigslist for a steal???


socalRW is offline   Reply With Quote
Old 12/11/2018, 08:52 AM   #10
KnightMetro
Registered Member
 
KnightMetro's Avatar
 
Join Date: Jul 2007
Location: Atlanta, GA
Posts: 130
Well, if you are wondering what took so long, it took 3 months for the tank to arrive.

Sweet baby Christmas Jesus this tank is bigger in person than I thought. SCA really does get close to Elos/Reef Savvy/Red Sea when it comes to their finished product. I have not got it on the stand yet, but I am extremely impressed at the finished product for the price.



So, we are back to it and there have been some changes. We are no longer putting the tank in the wall in the kitchen. I have ADD, so I overthunk it too many nights and came up with too many pros and cons for having it in that area.

Pro - Super safe area as it sits on top of two load bearing walls and 4 beams. Easy access to run pipes down the backside right into the future utility room downstairs AKA fish room.

Con - It's in the kitchen. A lower traffic area for enjoyment everyday. You would only be able to stand there and stare at it vs it being in a room you could enjoy it's addition. We also wanted to turn that nook into a drybar/storage area for the kitchen and have it be an addition to the kitchen layout. Plus, whenever we do need to sell the house, it would require ripping out the tank and renovating that entire area to return it back to part of the kitchen layout.

So, we have decided to convert the dining room, with the bay window, to a sitting room where the reef tank will be the centerpiece. I will also be running the tank equipment under the tank until the basement can be finished with a fish room. If I was to wait to get the fish room done to start the tank, we'd be looking at this time next year. I'll just get the fish room ready over time and then patch the tank into the basement when ready.

The tank will sit on the back wall of the dining room, which has the garage behind it, and will be across several load beams as well as a main beam of 4 2x10's. So I still feel pretty good about the tank load.

This is how things sit now, and I'll add some steps I took to make the stand frame below.

I went aread and masked off the dining room so I don't make the living area of the house a war zone.




I needed an excuse to at least start renovating one f the rooms in the new house and the dining room was a good start. One, I get my fish tank started, and two it really doesn't get in our way in regards to the parts of the house we use. The "breakfast nook" on the backside of the house is so large we'll just turn that into the dining room in the long run.



Last edited by KnightMetro; 12/11/2018 at 09:02 AM.
KnightMetro is offline   Reply With Quote
Old 12/11/2018, 09:04 AM   #11
KnightMetro
Registered Member
 
KnightMetro's Avatar
 
Join Date: Jul 2007
Location: Atlanta, GA
Posts: 130
Here is the steps I went through over the last month to build the stand frame. It will be skinned with magnetic doors I'll put together this month. Probably a carbon gray stained oak.

Top framework.






Bottom of frame.






The left and right side will have a hidden area to keep electronics and monitors accessible and dry. The sump area is recessed into the frame so if we have any leaks it sits in a tub of sorts.

The whole stand was done in an oil based exterior primer and then in a gloss smoke gray enamel so it will be easy to clean and keep water out of the wood.

Now this was not what I was expecting. I know I went to good lengths this time around to true up measurements, to pay a little more for 2x4s and 2x6's that had 90 degree edging and decently straight. I put about 24 1/4" felt pads on the bottom of the tank so it could move around while we finish the room. Also to give the tank a bit of an air gap underneath for when any minor water makes it under.

I was NOT expecting it to come out so level though.






KnightMetro is offline   Reply With Quote
Old 12/11/2018, 09:14 AM   #12
neilp2006
Registered Member
 
Join Date: Oct 2015
Posts: 262
Cool stuff man, looking forward to seeing it come together.

Iím in suwanee. You have reef Shac near you, and Nemo aquarium in Duluth. Both worth the drive.

I have a 180 in wall with basement sump fishroom. Hit me up on my thread if you need anything.

https://www.*********.com/threads/ne...shroom.390436/





Sent from my iPhone using Tapatalk


neilp2006 is online now   Reply With Quote
Old 12/11/2018, 11:48 AM   #13
shellsea
Registered Member
 
shellsea's Avatar
 
Join Date: Sep 2012
Location: Destin, Fl.
Posts: 486
Very nice job on the stand KnightMetro, even nicer job convincing the wife you needed that new tank! Who is actual tank manufacture SCA. If i can talk the wife into an upgrade of my 120 I may need to reach out for a custom build.


__________________
Jack "Shellsea" 120 mixed reef, Reef Breeder Photon 48, Archon Controller and a proud owner of a Lifereef Skimmer
shellsea is offline   Reply With Quote
Old 12/11/2018, 11:54 AM   #14
KnightMetro
Registered Member
 
KnightMetro's Avatar
 
Join Date: Jul 2007
Location: Atlanta, GA
Posts: 130
SC Aquariums out of California.

Shipping is usually free, which is huge for a tank this size, and they can do full custom work. I think all of their tanks are also Starfire.

I wanted a 5 foot tank with a little extra depth and drilled for the Shadow overflow.


KnightMetro is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 10:05 PM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2018 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2014
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.