|
05/26/2018, 02:53 PM | #1 |
Registered Member
Join Date: Nov 2012
Location: N.E. Ohio
Posts: 279
|
Tunze 5017 went nuts
Filled up my ATO reservoir yesterday, 9 gallon capacity. Got up this morning and went into the fish room like always, to check on things. Imagine my shock when I see that the reservoir is down to 6 gallons!
First thing I did was look in the sump and sure enough, the water level is several inches above the sensor, but not enough to set off the high level sensor. (the sensor is clean, nothing on it) This is the first time I've ever had an issue in the 5 1/2 years that I've had it. Any opinions or fixes? TIA! |
05/29/2018, 08:58 AM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
My main hunch would be a siphon because the controller would stop a fill after 10 continuous minutes which generally limits it to 1.5- 3 gallons depending on head pressure and pump speed.
Check siphon situation 3
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
05/29/2018, 10:36 AM | #3 |
Registered Member
Join Date: Nov 2012
Location: N.E. Ohio
Posts: 279
|
Thank you RV, That's a very possible situation. I'm going to adjust my tubing now so that won't happen again.
|
Thread Tools | |
|
|