|
03/26/2019, 07:15 PM | #1 |
Registered Member
Join Date: Aug 2002
Location: Lakewood Ranch Fl.
Posts: 872
|
7095 Multi controller cords
Hi Roger,
Is it possible to purchase just the 4 cords that connect the 7095 multicontroller to the individual pumps and is there a way to run more than 4 pumps (I have 6 total)? Thanks
__________________
Living it up in Florida Current Tank Info: 210 gal, 300lbs LR, Aquamaxx Skimmer, 3x Reefbreeders LED's & T5's. |
03/27/2019, 10:20 AM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Yes, they are just a 5 pin DIN or MIDI cable, Guitar Center tends to have them. It is our part 7092.300, BRS stocks them, you can also order them on Tunze.com. To split them is possible but if you have the older pumps without the built in 7090 controller, you need the older 7092.340, these have not been made for a while, BRS may have one, I have also seen them on eBay. 7090.300 can be used with new pumps that have the 7090. The reason for this is the old pumps did not have any circuitry to prevent a backfeed of current or a signal crossover, the 7092.340 handles this, on the new pumps the 7090 has this circuitry built in. You can connect up to 8 pumps, 7092.340 splits 2 cables to 4.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
03/29/2019, 12:35 PM | #3 |
Registered Member
Join Date: Aug 2002
Location: Lakewood Ranch Fl.
Posts: 872
|
Thank you
__________________
Living it up in Florida Current Tank Info: 210 gal, 300lbs LR, Aquamaxx Skimmer, 3x Reefbreeders LED's & T5's. |
|
|