Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping ...an online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > Sponsor Forums > Tunze
Register Blogs FAQ Calendar Mark Forums Read

Notices

Reply
Thread Tools
Old 10/12/2017, 03:20 AM   #1
nowlan
Registered Member
 
Join Date: Sep 2009
Posts: 89
Tunze 9001 - magnets fall off.

Hello Roger,

I bought a Tunze 9001 around years ago when they first came out.

I find the plastic magnet that attaches to the skimmer continually falls off. I think the prongs are just not quite right. Not sure if there was a known issue.

Has been held on previously using a zip tie through the magnet. Recently cleaned the skimmer, and used a rubber band which failed the other day.

Tempted to superglue the magnet to the skimmer to stop this from happening. Not sure what the deal is. I am not using the spacer thing that is in the box. The prongs look similiar.

Still an issue with microbubbles. The skimmer was pulling decent skim recently, but has a tendency to foam up behind the cup.

Oh well, just wanted to pass on the 'feedback' before trying superglue.

Anthony.


nowlan is offline   Reply With Quote
Old 10/12/2017, 08:50 AM   #2
rvitko
RC Sponsor
 
rvitko's Avatar
 
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,040
Hi Anthony,

Check the tabs that lock into the spacer from the body, if they are broken, this is the cause, otherwise the spacer has a defect and the holes are too wide. All spare parts are available and in stock.

Microbubbles will tend to be depth related, probably 18 months ago we started including a bubble trap foam that is inexpensive and readily available but usually once broken in this is not needed if the depth of submersion is set so the marked water line is the absolute maximum and this waterline is never more than 1" above the actual water line. Typically the least bubbles will come from a submersion where the waterline mark is 1/2" above the actual waterline and the air is as close to fully open as possible. When you restrict the air the water speed increases and more bubbles are ejected so work with depth first and accept that a small skimmer will skim wetter.

Foam behind the cup means the baffle plate under the cup is either pressed in too far, it sits on a ledge in the body, or it is upside down, it can also mean the skimmer is too deeply submerged.


__________________
Roger Vitko
Tunze USA

"He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!"

Current Tank Info: 210 gallon planted tank with Altum Angelfish
rvitko is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -6. The time now is 11:37 PM.


TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2017 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright 1999-2014