|
09/28/2017, 07:10 PM | #1 |
Registered Member
Join Date: Dec 2007
Location: Genoa, IL
Posts: 599
|
Profilux 4 / Doser 2.1
I am looking to purchase a controller. Wanted to go with the best and have decided to go Profilux 4. I prob will not be buying both at the same time but I am in need of a doser right away. Since I was going to go with Profilux I figured I would get there doser. If I get the 2.1 4 pump stand alone doser will it work with the Profilux 4 system when I buy it? I see they have a master and a slave. To my knowledge the slave will only work with the Profilux 4 system but can the 2.1 stand alone master unit be transformed into a slave unit when I do get the Profilux 4?
__________________
135g w/ basement fish room, custom made Advanced Acrylics sump, custom ATS, Aqua Illumination lights, saltwater mixing station RIP my 180g DT,75g sump,90g fuge, 3X250w MH w/Radiums,MSX300A drilled |
09/28/2017, 07:21 PM | #2 |
Registered Member
Join Date: Jul 2016
Location: Fort Myers, FL USA
Posts: 107
|
You are correct; a Stand Alone can be turned into a slave.
Stand Alone can be run in master mode, stand alone for the time being, then expanded to with additional master or slave chassis, or turned into a slave and connected to another Master, or a ProfiLux 3/4 which will act as it's master.
__________________
Marco GHL USA - Fort Myers, FL Operations For All GHL questions please refer to our Sponsor forum: http://reefcentral.com/forums/forumdisplay.php?f=527 |
11/22/2017, 01:02 PM | #3 |
Registered Member
Join Date: Mar 2011
Location: etiwanda, ca
Posts: 225
|
how does P4 connect to doser?
wired or wireless? what kind of wire or cable is necessary ? Sent from my iPhone using Tapatalk |
11/22/2017, 02:33 PM | #4 | |
Registered Member
Join Date: Sep 2005
Location: Modesto, Ca
Posts: 1,066
|
Quote:
1. If it's a stand alone then you can program it via the dosing app or through GCC. 2. If it's a slave then you can program it through GCC or MyGHL or the Connect App. In this mode the Doser is connected to the Profilux via a PAB Cable. |
|
11/22/2017, 02:39 PM | #5 |
Registered Member
Join Date: Mar 2011
Location: etiwanda, ca
Posts: 225
|
ok so slave mode needs PAB cable.
Is cable included with doser 2.1 SA? Sent from my iPhone using Tapatalk |
11/22/2017, 03:09 PM | #6 |
Registered Member
Join Date: Sep 2005
Location: Modesto, Ca
Posts: 1,066
|
|
Thread Tools | |
|
|