|
08/30/2015, 09:04 AM | #1 |
Registered Member
Join Date: Apr 2002
Location: Olympia. WA.
Posts: 8,648
|
Vectra L1
I would really like to try a L1 pump when they come out, but I see the output is 1".
My closed loop plumbing is all 1-1/2". The return plumbing goes to a 1-1/2" header across the back of the tank, with 1" risers going to the bulkheads on the back of my tank. I can make the pvc tie in to the header using reducers going from the pump's 1" output to the 1-1/2" header near the pump's location inside the stand, but my question is, what would that do to the rated flow? Also kind of curious with all the pvc I have, how much of the 3100 gph I would loose to head pressure?
__________________
240 gallon soft coral tank 50 gallon lps tank |
08/31/2015, 07:51 AM | #2 |
Registered Member
Join Date: Mar 2013
Location: Allentown, PA
Posts: 1,956
|
Martin,
Thanks for providing the photo of your plumbing, and that's a great looking setup. I have seen several nice head pressure calculators online, and personally I use this one: https://www.pondliner.com/blog/head-...re-calculator/
__________________
Alex Y. Customer Service Representative at EcoTech Marine Call: 1-800-785-0338 Ext. 2 or E-mail: Service@EcoTechMarine.com |
08/31/2015, 08:09 AM | #3 |
Registered Member
Join Date: Jul 2015
Location: The Woodlands TX
Posts: 440
|
What is the projected date for these to be on people's doorsteps?
|
08/31/2015, 08:49 AM | #4 | |
Registered Member
Join Date: Apr 2002
Location: Olympia. WA.
Posts: 8,648
|
Quote:
Thanks Alex. But I also am concerned with the dia. of the output of the pump vs. my closed loop header. I am not going to be able to change the header, nor do I want to. I can do the tie-ins under the stand. Is the change in dia. pvc to 1-1/2" going to affect the pumps performance?
__________________
240 gallon soft coral tank 50 gallon lps tank |
|
09/01/2015, 12:52 PM | #5 | |
Registered Member
Join Date: Jul 2012
Location: Troy,Montana
Posts: 440
|
Quote:
According to Tim Marks, the performance numbers-flow rate/ head were done w/o the compression fittings....1 1/2". RJ
__________________
RJ 120 Reef, 40 Sump, Vectra M1 Return Pump, Vertex 180i Skimmer, 2 WP-40 controllable circulation pumps, BRS GFO Reactor, Avast Biopellet Reactor, Apex Controller, 2 part dosing, Dual Carbon/ Purige Current Tank Info: 120 Gal. Mixed Reef |
|
09/01/2015, 01:06 PM | #6 | |
Registered Member
Join Date: Jul 2012
Location: Troy,Montana
Posts: 440
|
Quote:
According to Tim Marks, the performance numbers-flow rate/ head were done w/o the compression fittings.... so the numbers reflect 1 1/2" output. RJ
__________________
RJ 120 Reef, 40 Sump, Vectra M1 Return Pump, Vertex 180i Skimmer, 2 WP-40 controllable circulation pumps, BRS GFO Reactor, Avast Biopellet Reactor, Apex Controller, 2 part dosing, Dual Carbon/ Purige Current Tank Info: 120 Gal. Mixed Reef |
|
09/01/2015, 04:21 PM | #7 | |
Registered Member
Join Date: Apr 2002
Location: Olympia. WA.
Posts: 8,648
|
Quote:
Thank-you.
__________________
240 gallon soft coral tank 50 gallon lps tank |
|
|
|