Reef Central Online Community

Home Forum Here you can view your subscribed threads, work with private messages and edit your profile and preferences View New Posts View Today's Posts

Find other members Frequently Asked Questions Search Reefkeeping online magazine for marine aquarists Support our sponsors and mention Reef Central

Go Back   Reef Central Online Community > Sponsor Forums > Neptune Systems
Register Blogs FAQ Calendar Mark Forums Read


User Tag List

Thread Tools
Old 05/19/2017, 08:44 AM   #1
Registered Member
Dr RBG's Avatar
Join Date: Apr 2017
Location: New England
Posts: 127
Apex Fusion Video Cam

Can someone let me know which current (2017) video cams or webcams are working wit their Apex fusion system? I have been checking the threads but most are relatively out of date

I appreciate everyone's help over the past months getting my system going.

Dr RBG is offline   Reply With Quote
Old 05/25/2017, 06:15 AM   #2
Registered Member
jsdancer's Avatar
Join Date: Dec 2001
Location: Orlando
Posts: 804
tagging along because I too am interested.

180g mostly sps, 3 250 wt radiums w lumenmax reflectors, 9 superbrights actinics, 2 MP 40ES Vortex, Reef Octopus SRO 3000, Bubble blaster 10,000 all controlled by an ACJR
jsdancer is offline   Reply With Quote
Old 05/25/2017, 10:05 AM   #3
Registered Member
wmo168's Avatar
Join Date: Aug 2008
Location: South Florida
Posts: 352
x2 tagging

wmo168 is offline   Reply With Quote
Old 05/29/2017, 07:43 PM   #4
King Lineatus has Risen!
DarthSimon's Avatar
Join Date: Mar 2007
Location: NYC Metro Area
Posts: 1,066
Just did this today.....
Hello All,
Took a stab today at hooking up a D-Link 936L IP Camera to Fusion. So I did tons of research on the model and configurations.
Here is what I found to work the best. Could possibly work with other models......

1: Use this in the URL Settings of Apex Fusion Camera:

[url]http://(Username):Password)@(External IP) : port)/video/mjpg.cgi
Example : http://admin:[email protected]:9191/video/mjpg.cgi

2: Username and Password are set in the DLink Advanced Setup...

3: External IP is your ISP's IP Address, not internally assigned ip router IP for Example (192.... or 10.1.....) Do Not use These!!!

4: Set a Static Ip Addy for the camera in the Dlink Advanced Setup so the internal never changes. Here you do use a local or Just pick an available IP that isn't being used. ( For Example..... Make sure this doesn't conflict with Anything that already grabbed this Router Ip Addy...

5: Set the Local Gateway (Router IP) in Dlink Advanced Setup.

6: Set the Port in Dlink Advanced. I used 9191.

7: Port Forwarding in your Router. Set up a port forward to the static IP that you setup in Dlink Setup and add the port that you used in the Dlink Setup as well....

This worked like a charm for me. The Only down side was the only browser that works with my command line is Mozilla. Chrome, Edge, and IE will not work unless you enter the url in another browser Window open it up, video goes on. Then you can start fusion and video works. Mozilla works without the previous step.

By following these steps you can use either your local or external IP to view your camera locally. Makes more sense to use the External so If you leave your Home Network, you can use the Cam Anywhere.... Also App works flawlessly...

I work in the IT field and thought this could be of help...

Steve Simon

DarthSimon is offline   Reply With Quote
Old 05/30/2017, 09:49 AM   #5
Registered Member
wmo168's Avatar
Join Date: Aug 2008
Location: South Florida
Posts: 352
One thing cross my mind, is it safe to pass the userid and password in the open as non secure http and also saved it on the Fusion Cloud?

http://(Username):Password)@(External IP)

Just worry some hacker able to get into your cam and your home network... you know what I mean...

wmo168 is offline   Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -6. The time now is 03:41 AM.

TapaTalk Enabled

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2018 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright 1999-2014
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.