|
02/13/2018, 01:56 PM | #1 |
Registered Member
Join Date: Feb 2009
Location: newcastle on
Posts: 58
|
Rodi well water
Ok so I’m flying through do resin on well water can I degas the well water then drop the pickup hose from the booster pump into the degassed water and run it through the rodi unit
Sent from my iPhone using Tapatalk |
02/13/2018, 02:02 PM | #2 |
RC Sponsor
Join Date: Sep 2009
Posts: 14,173
|
You likely have high Co2 levels in your well water which is very common. Best is to setup a cistern and degas the water in there and then use a pump such as the booster pump to feed the RODI. Make sure to feed air and circulate the cistern or what ever you are going to degas in before pumping the water into the RODI and the longer you degas for the better as you want to remove as much Co2 as possible.
__________________
Director Customer Support Royal Exclusiv USA For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745 Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476 |
02/13/2018, 07:25 PM | #3 |
Ver. 2.1
Join Date: Mar 2005
Location: Rehoboth, MA
Posts: 1,803
|
I have the same problem.
My solution... Go to the post #17 http://reefcentral.com/forums/showthread.php?t=2661614
__________________
Pete "I never make mistakes... I thought I did once, but I was wrong" Current Tank Info: In the process - http://reefcentral.com/forums/showthread.php?t=2661614 |
02/13/2018, 07:33 PM | #4 |
Registered Member
Join Date: Feb 2009
Location: newcastle on
Posts: 58
|
So your saying I have to degas the ro water I can’t just degas the well water then pump that through the rodi system
Sent from my iPhone using Tapatalk |
02/14/2018, 03:58 AM | #5 |
Ver. 2.1
Join Date: Mar 2005
Location: Rehoboth, MA
Posts: 1,803
|
No, either way will work.
This was just a better solution for me.
__________________
Pete "I never make mistakes... I thought I did once, but I was wrong" Current Tank Info: In the process - http://reefcentral.com/forums/showthread.php?t=2661614 |
Thread Tools | |
|
|