|
04/05/2020, 08:30 AM | #1 |
Registered Member
Join Date: Mar 2011
Location: Pt. Colborne, ON, CANADA
Posts: 209
|
Calcium reactor and khg monitor
Hello, I currently have a mtc procal reactor. Controlled by apex. And a khg monitor, with apex module.
Currently when khg gets a sample over 8.3 kh It turns off the co2 solonoid. Which is ok... but Is there a way to have 2 sets of ph ranges. For example: if my kh is over 8.3 then run the reactor ph between 6.8 and 6.75 And if kh is below 8.3 then run reactor from 6.6 to 6.65? Thanks in advance.
__________________
220 gal mixed reef , Apex, 8 Bulb Tek light, led supplement, With 135 gallon sump. SRO3000INT , KH Guardian, 4 X Vortech MP40w, MTC calcium reactor . Current Tank Info: 220 gal sps dominated |
Thread Tools | |
|
|