Wxm issue with radion

bearpeidog · 03/03/2019, 09:30 AM

Hello - my reeflink was disconnected more than it was connected to I switch over to the WXM to control my radions. 2 -G3 pros and 2 - G4’s.

All firmware up to date on apex and WXM Module.

The issue I have is the lights (all of them at the same time) start freaking out going through some sort of demo mode or test mode. All spectrums come on independently. Be great if it was still Christmas but all I want is stable lights!

Any idea of how to troubleshoot/resolve? I did set it to channel 2 just in case that was it. Everything besides the apex was power cycled. The lights are taking the programming and I can power them off etc from the apex so they are connected.

Ideas?

03/03/2019, 09:30 AM	#1
bearpeidog Registered Member Join Date: Apr 2005 Location: Milton, Vermont Posts: 560	Wxm issue with radion Hello - my reeflink was disconnected more than it was connected to I switch over to the WXM to control my radions. 2 -G3 pros and 2 - G4’s. All firmware up to date on apex and WXM Module. The issue I have is the lights (all of them at the same time) start freaking out going through some sort of demo mode or test mode. All spectrums come on independently. Be great if it was still Christmas but all I want is stable lights! Any idea of how to troubleshoot/resolve? I did set it to channel 2 just in case that was it. Everything besides the apex was power cycled. The lights are taking the programming and I can power them off etc from the apex so they are connected. Ideas? __________________ Bill Current Tank Info: 180 gallon Starfire, 3-Radion G1, Tunze with 7091 Controller, 2- ecotech mp40s, MP60, Panworld 250 return pump, TunzeATO, XP2000ss Reef Octopus Skimmer, Theiling rollermat