|
12/17/2017, 05:27 PM | #1 |
Registered Member
Join Date: Sep 2016
Posts: 265
|
Skimmer
Hi all,
Just got my tank up and running today, its a 37G with a 10G sump. I have a Bubble Magus Curve 5 Skimmer, plugged it in and it is not making any sort of bubbles or vortex action, all it is doing is is raising the water in the skimmer neck when i adjust the valve. Is there something wrong with my skimmer? Thanks. |
12/17/2017, 05:52 PM | #2 |
Registered Member
|
It can take a skimmer a few days or even longer to break in. If it's still not working a week from now, post again.
__________________
Stuart Current Tank Info: 300G Caribbean biotype reef set up in 2003. |
12/17/2017, 06:22 PM | #3 |
Registered Member
Join Date: Feb 2006
Location: WEST ALLIS ,WI
Posts: 922
|
sounds like something is wrong..it should be making bubbles ..you should see some kind of action...maybe post a pic of your skimmer...
|
12/17/2017, 07:12 PM | #4 |
Registered Member
Join Date: Apr 2016
Location: Central Nebraska
Posts: 3,190
|
Is the airline for the venturi above water?
__________________
Pat Current Tank Info: 125 in-wall , 40b sump. 6 bulb T5. ASM G2 skimmer. LPS and leathers |
12/17/2017, 07:29 PM | #5 |
Registered Member
Join Date: Sep 2016
Posts: 265
|
Yes the airline tubing/silencer is above the water. No bubbles are being made at all
Sent from my SM-N950U using Tapatalk |
12/17/2017, 07:33 PM | #6 |
Registered Member
Join Date: Jul 2011
Posts: 594
|
Is that salt water?
Sent from my iPad using Tapatalk |
12/17/2017, 07:35 PM | #7 |
Registered Member
Join Date: Sep 2016
Posts: 265
|
|
12/17/2017, 07:35 PM | #8 |
Registered Member
Join Date: Jul 2011
Posts: 594
|
Hmmm
Sent from my iPad using Tapatalk |
12/17/2017, 07:36 PM | #9 |
Registered Member
Join Date: Jul 2011
Posts: 594
|
Does the red knot on top of the silencer twist?
Sent from my iPad using Tapatalk |
12/17/2017, 07:44 PM | #10 | |
Registered Member
Join Date: Sep 2016
Posts: 265
|
Quote:
Last edited by Nick30G; 12/17/2017 at 07:56 PM. |
|
12/17/2017, 08:49 PM | #11 |
Registered Member
Join Date: Apr 2016
Location: Central Nebraska
Posts: 3,190
|
Yes it should suck air in through the silencer. Try taking the silencer off to see if something is plugged
__________________
Pat Current Tank Info: 125 in-wall , 40b sump. 6 bulb T5. ASM G2 skimmer. LPS and leathers |
12/17/2017, 08:54 PM | #12 | |
Registered Member
Join Date: Oct 2007
Location: West Michigan
Posts: 1,010
|
Quote:
Check the venturi - see that the air intake isn't pressed in to far. This is only a guess on my part. It should pull some air. GL |
|
12/17/2017, 09:38 PM | #13 |
Registered Member
Join Date: May 2016
Location: SF Bay Area
Posts: 293
|
I'd say there's something plugging up the air intake or there's a hole below the water level that's letting in water rather than air?
__________________
40g breeder DT, 40g breeder sump |
12/18/2017, 04:20 PM | #14 |
Registered Member
Join Date: Jul 2007
Location: Orange County CA
Posts: 3,819
|
First thing is the pump working?Take the silencer off and blow thru the tube to see if it's clear.
|
12/18/2017, 07:14 PM | #15 |
Registered Member
Join Date: Sep 2016
Posts: 265
|
I got it working. Dont even know what was wrong with it. I just took apart the air intake and tube and it works. Now i have a new issue. When I start it up, it overflows the entire cup within a about 30 seconds even though i have it at 8' water line and have the dial at Max. Not sure how to really proceed in breaking this thing in if its just going to overflow?
|
12/18/2017, 07:20 PM | #16 |
Registered Member
Join Date: Feb 2006
Location: WEST ALLIS ,WI
Posts: 922
|
thats great ..now you should be able to turn it down now...the handle with the numbers on it...turn it down to lowest number ..my does same thing when i go past 3...
|
12/18/2017, 07:54 PM | #17 |
Registered Member
Join Date: May 2016
Location: SF Bay Area
Posts: 293
|
I don't have that particular skimmer, I have a Vertex Omega and according to the instructions, it says to run it without the collection cup and let it overflow for like 24 hours. Mine took about a month before it stopped overflowing the skimmer cup. I even had to raise it up an inch even tho it was at the recommended level.
__________________
40g breeder DT, 40g breeder sump |
12/18/2017, 08:23 PM | #18 |
Registered Member
Join Date: Jul 2007
Location: Orange County CA
Posts: 3,819
|
Open the exit valve all the way.You may have to raise the skimmer up
|
12/18/2017, 09:25 PM | #19 |
Registered Member
Join Date: Sep 2016
Posts: 265
|
The valve is on Max, interestingly enough the controls on this skimmer are reversed compared to other skimmers for whatever weird reason. Still is overflowing no matter where the turn the valve to.
Sent from my SM-N950U using Tapatalk |
|
|