|
11/01/2016, 07:51 AM | #51 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
Thanks for all the great advice. Once I acid bathe the rocks I will then play with it a little more in the tank to make sure I have enough room for growth & activity in the long run.
Also I have always put sand in first & then rock. Do y'all recommend that approach or should I put rock in first & then put sand around rocks. I'm going with 280 lbs of tropic eden sand that will be seeded with a few cups from my current tank. Sent from my iPhone using Tapatalk |
11/04/2016, 12:43 PM | #52 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
Gonna get my gussets welded in the top corners of my back 2 legs tomorrow, do an acid bath on my rocks & start on let plumbing!! Got some new equipment in the mail when my new bulkheads arrived so I get together a list to see what everyone thinks.
Sent from my iPhone using Tapatalk |
11/06/2016, 10:00 AM | #53 |
Registered Member
Join Date: Aug 2008
Location: Mount Juliet, TN
Posts: 4,528
|
I may have missed it, but what kind of corals are you planning on keeping? If you're not keeping mostly SPS then I think your rockwork will be fine. If you are, then yeah you probably want to take some out.
|
11/06/2016, 02:56 PM | #54 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
I'm hoping that i end up with mostly sps but will have a few lps & softies as well. So I guess it will end up being a mixed reef in the end. It was kinda hard to get a real feel for the open space when we had it all set up on the old stand so I will have to play with it a little more as it all goes in the tank.
Sent from my iPhone using Tapatalk |
11/08/2016, 09:23 AM | #55 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
Hello again. Kinda got slowed up a bit but still gaining. . Since this was a used tank that I purchased, I'm gonna do a leak test on it while I'm cleaning & glueing the rock work. It was full & running fresh water before I bought it. Few questions--1-how long on leak test (week or 2)? 2-- do I need to clean it with anything special since it was fresh & will be set up salt?? Thanks
Sent from my iPhone using Tapatalk |
11/08/2016, 05:45 PM | #56 |
Registered Member
Join Date: Aug 2008
Location: Mount Juliet, TN
Posts: 4,528
|
No you don't need to clean it out other than giving it a good rinse, which the leak test will accomplish. I've never done a leak test that lasted more than a few hours, but I've only purchased a handful of used tanks over the years.
|
11/12/2016, 01:12 PM | #57 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
Well the tank has been holding water for 2days now while I've been working on plumbing.
Got the plumbing done last night. Now fill up filters to leak test plumbing!! Sent from my iPhone using Tapatalk |
11/12/2016, 01:14 PM | #58 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
Oh crap. I've never used silicone on bulkheads before. Used a little on all 5 in filters & all 5 leak.
Sent from my iPhone using Tapatalk |
11/12/2016, 01:21 PM | #59 |
Registered Member
Join Date: Oct 2013
Location: Kenmore, WA
Posts: 1,542
|
Delete me
__________________
375g DT 125g sump acrylic, Mixed SPS/LPS tank with anemones and fish. Current Tank Info: 375g Build thread http://www.reefcentral.com/forums/showthread.php?t=2608197 |
11/12/2016, 02:04 PM | #60 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
|
11/13/2016, 09:37 PM | #61 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
Well got my leaks fixed in filters. Tanks been holding water since Thursday & pump has been running all day today & everything seems to be ok.
Got my rocks acid bathed yesterday morning & soaked up the sun for the last 2 days. This afternoon I glued my 2 towers together with Jurassic gel from BRS. Letting them sit to dry. Here is a rough list of what I have for this tank: --dolphin amp 4750 for return --SRO 5000 sss int protein skimmer with auto neck cleaner & overflow chamber with safety shut off switch. --4, 300 watt heaters --2, mp40qd (might get a third) --2, maxspect gyre xf150 --icecap battery backup --gonna use my 250 watt MH fixture for now but probably going to get 2 400, supplemented by t5. --have a 150 gallon tank laying around that I'm going to plumb into a refugium. --korallin calcium reactor (upgrade when I need too) --BRS dual stage reactor for gfo/carbon --Spectrapure ro/di unit with dual tds meter I'm sure I'm forgetting some stuff!! Sent from my iPhone using Tapatalk |
11/14/2016, 12:54 AM | #62 |
Registered Member
Join Date: Jul 2016
Location: Los Angeles
Posts: 63
|
The build look nice. Good job on wood working skillz.
__________________
Current Tank Info: JBJ 28 GalNano Cube - Established June 2016 |
11/14/2016, 03:00 AM | #63 |
Registered Member
Join Date: Sep 2016
Location: Texas
Posts: 60
|
Following along, very nice build so far, how does your wife like it?
|
11/14/2016, 08:58 AM | #64 |
Registered Member
Join Date: Apr 2012
Posts: 2,258
|
Looking good! that's a great equipment list, I doubt you'll feel the need for the other MP40 until things really grow in but it depends on where you position everything.
One thing, consider your usage scenario of the ball valves on your main return pump in the photos: it may make more sense to put the unions between the pump and the valve so you can easily remove + clean the pump with the valves closed leaving all the water in the sump/DT. |
11/14/2016, 08:16 PM | #65 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
|
11/14/2016, 08:17 PM | #66 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
|
11/14/2016, 08:19 PM | #67 | |
Registered Member
Join Date: Nov 2014
Posts: 211
|
Quote:
Thanks for the reply. I'm planning on the 2gyre's on the ends with the mp40's on the back wall. Just what I'm thinking for now but will depend on water movement when it's up & running. Sent from my iPhone using Tapatalk |
|
11/14/2016, 08:22 PM | #68 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
Well started mixing my saltwater tonight. Hopefully I'll be able to get it set up & cycling by this weekend.
Sent from my iPhone using Tapatalk |
11/14/2016, 09:59 PM | #69 |
Registered Member
Join Date: Sep 2016
Location: Texas
Posts: 60
|
|
11/14/2016, 10:03 PM | #70 | |
Registered Member
Join Date: Nov 2014
Posts: 211
|
Quote:
Also good catch on the valve/union detail. That was how the pump was plumbed in before. I believe there are unions right at the pump inlet/outlet. When I drain everything I will definitely check into that. Good catch & thanks for the heads up. Could save me some headaches in the long run. Sent from my iPhone using Tapatalk |
|
11/16/2016, 03:13 PM | #71 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
Well I had to leave work to pick up sick kid from school so I took advantage of my day. .
280lbs of tropic eden sand was a little more than I expected but looks pretty good. I went with a combination of reef flakes & mini flakes. Hopefully it doesn't move like the sand I currently have. Started to do some rock work. Took some advice from earlier in my thread & removed some pieces but tried to stay with the original design I posted. I think it came out pretty good. Don't mind crappy pics. Anyone have any thoughts or suggestions. I know the rock on top of the big one towards the right is close to the top (about 8" from water surface) but I wanted to have one high point for visual appearance. Sent from my iPhone using Tapatalk |
11/16/2016, 03:15 PM | #72 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
A few more crappy pics!!!
Sent from my iPhone using Tapatalk |
11/16/2016, 03:54 PM | #73 |
Registered Member
Join Date: Nov 2014
Posts: 211
|
|
11/16/2016, 10:42 PM | #74 |
Registered Member
Join Date: Dec 2006
Location: Denver, CO
Posts: 1,241
|
I like it a lot! Excellent work!
__________________
"An aquarium is a hole between sheets of glass that the aquarist fills with money." Current Tank Info: 93g Cube |
11/16/2016, 11:00 PM | #75 |
reef mechanic
Join Date: Jun 2015
Location: Phoenix, AZ
Posts: 819
|
That's a beast of a tank. Cool build
Sent from my iPhone using Tapatalk
__________________
my build: http://www.reefcentral.com/forums/showthread.php?t=2512689 my fuge thread: http://reefcentral.com/forums/showthread.php?t=2523500 Current Tank Info: DSA NEO 65G reef powered by Kessil |
|
|