Reef Central Online Community

Go Back   Reef Central Online Community > Blogs > Precision Marine Systems' Daily Activity
Blogs FAQ Calendar Mark Forums Read

Notices

Want to know what's happening at PM? Check back with us to find out. Feel free to jump in anytime. Look forward to hearing from you!
Rate this Entry

That was a...

Posted 08/07/2012 at 12:28 PM by precmarinesys

good time. Brian and I got here early and had at it. Those machine can be temperamental at times. After adjusting the voltage regulator to the keypad (which we do regularly). The regulator is inside a heavy-duty metal cabinet at the end of the vacuum table. There's a motherboard that is 3' x 2' in there. It runs off of 240v three-phase. It's stout. At any rate, after removing the spindle, bearing cars, cleaning everything, replacing the proximity switch (just for fun), we reassembled it. We also troubleshot the card that holds the flash software that runs each axis. The keypad was not responding to the input which controls the Z axis. After removing all of the wires that do into the card and cleaning them with contact cleaner....boom, works like the beast that it is. Glad that's over. Guys have to work late to make up for lost productivity and meet deadlines.

Attached is the workstation for CAD/CAM work, tool-pathing and file output.

[IMG]https://lh6.googleusercontent.com/-gZu8sJbxeoY/UCFZej3h2GI/AAAAAAABIGA/l5lR1WmBr10/s1000/DSC_0054.JPG[/IMG]
Posted in Uncategorized
Views 12899 Comments 0 Edit Tags Email Blog Entry
« Prev     Main     Next »
Total Comments 0

Comments

 

All times are GMT -6. The time now is 12:21 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.