|
Mounted the Water Saver Kit from BRS and changed out the old membrane. Mounted a solenoid to control the output of RO/DI unit. I hate putting holes in pipes so I found a solution to getting water to my RO/DI unit without a saddle clamp. I did not have anyway to use a normal hose "Y"* like you would use at the washing machine connection. Since I live quite aways from anything, I go to the local hardware store. You need these Ace Hardware part numbers if you have 3/8 water lines from the wall shut off to your faucet.
Add -a-Tee 3/8 - 3/8 - 1/4 #4308995*
Compression Sleeve 1/4 Delrin #41284
Compression Insert 1/4 Brass #41288 (you need this to keep the 1/4 plastic tube from collapsing)
Compression Nut 1/4 Brass # 41222
|