Reef Central Online Community

Go Back   Reef Central Online Community > General Interest Forums > New to the Hobby
Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Unread 03/22/2021, 07:07 PM   #1
Daddyrawg
Registered Member
 
Join Date: May 2018
Posts: 814
Uv setup flow direction advise

This setup would be easiest install for me.
Tee off return line thru the uv in front of sump then back up into valve flowing back down into sump.. is this acceptable?
Thanks 20210322_180413.jpg

Sent from my SM-G973U using Tapatalk


Daddyrawg is offline   Reply With Quote
Unread 03/23/2021, 04:28 AM   #2
Member No. 1
Ver. 2.1
 
Member No. 1's Avatar
 
Join Date: Mar 2005
Location: Rehoboth, MA
Posts: 1,803
That would work, but is it possible to have the outlet from the UV go back up as a second return to the tank? Do you have a flow meter on the UV?
I run two returns, both have flow meters, both go over the top edge of the tank, one has the UV in-line. Both have gate valves on them so I can control the flow thru the UV.


__________________
Pete
"I never make mistakes...
I thought I did once, but I was wrong"

Current Tank Info: In the process - http://reefcentral.com/forums/showthread.php?t=2661614
Member No. 1 is offline   Reply With Quote
Unread 03/23/2021, 06:21 AM   #3
Timfish
Registered Member
 
Timfish's Avatar
 
Join Date: Jul 2010
Location: Austin, TX
Posts: 1,985
After years of getting rid of ick in systems the most effective setup I've found is having the UV on it's own pump set behind the rockwork at one end of the DT and the return at the top of the other end of the DT. For one the pump can be sized for the correct flow rate through the UV which is usually only a few hundred gallons an hour. Having the pump in the tank behind the aquascaping, from what I've seen, is quicker in reducing the larval parasite load in the system.


__________________
"Our crystal clear aquaria come nowhere close to the nutrient loads that swirl around natural reefs" Charles Delbeek
Timfish is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -6. The time now is 10:31 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2022 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright 1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.