Reef Central Online Community

Go Back   Reef Central Online Community > General Interest Forums > Reef Discussion
Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Unread 05/20/2007, 08:35 PM   #101
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
I finished the stand and got the lights mounted in the canopy. I think I'm going to have to raise the lights an inch or two. That will take a little effort, but it's ok. This week I'm going to start painting and staining. I still have to rebuild the doors, but that's low on the priorities right now.

What's the general concensus on bulb height for T5s? Right now they're at 4", and I think I want to move them up to 6" for better tank access. How's that?


__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 05/20/2007, 09:53 PM   #102
Pbrown3701
Registered Member
 
Pbrown3701's Avatar
 
Join Date: May 2006
Location: Stillwater, OK
Posts: 1,407
wow. IT looks really good. You could use some of those hydraulic pistons to support the top when fully open. That would give you both stability and make it easy to use....not to mention it would look ka


Pbrown3701 is offline   Reply With Quote
Unread 05/20/2007, 11:03 PM   #103
lbear
Registered Member
 
lbear's Avatar
 
Join Date: Dec 2005
Location: SF Bay Area
Posts: 391
I am working on my new 150 gal tank and am building a aluminum frame for 8 T5 bulbs retro similar to yours. I plan to install a simple pulley system which allows me to raise the aluminum frame several inches when accessing the tank.

Where do you mount your ballast?


lbear is offline   Reply With Quote
Unread 05/21/2007, 05:47 AM   #104
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
Quote:
Originally posted by lbear
I am working on my new 150 gal tank and am building a aluminum frame for 8 T5 bulbs retro similar to yours. I plan to install a simple pulley system which allows me to raise the aluminum frame several inches when accessing the tank.

Where do you mount your ballast?
My ballasts are pretty large (Icecap 660), so they will go in the stand with the rest of the electrical equipment. I had to purchase an extension to the wiring harness, but I think it will make for a better end product.


__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 05/21/2007, 05:49 AM   #105
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
Quote:
Originally posted by Pbrown3701
wow. IT looks really good. You could use some of those hydraulic pistons to support the top when fully open. That would give you both stability and make it easy to use....not to mention it would look ka
Do you have a link for some good hydraulic pistons? I searched around quite a bit, but I never found anything that I thought would work well in this application (a good amount of weight followed by quite a humid environment).


__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 05/21/2007, 05:52 AM   #106
Pbrown3701
Registered Member
 
Pbrown3701's Avatar
 
Join Date: May 2006
Location: Stillwater, OK
Posts: 1,407
I don't have a link - I've just seen some others use them. The humidity is an issue but i'm not sure how much of a concern.

Maybe call a place that sells truck bed covers and ask if they sell replacements?

ALso, you want to be sure they are oiless so there's no chance that they leak oil into the tank.


Pbrown3701 is offline   Reply With Quote
Unread 05/21/2007, 08:20 AM   #107
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
I may check out the auto parts store sometime this week, they seem to be relatively reasonably priced online (~$25 each for replacement "hood shocks" used on cars). Either that or just take them off my wife's car... it's not like she ever looks under the hood.


__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 05/22/2007, 07:09 AM   #108
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
So the oak is just bolted to the pine... we got a little creative as I want to be able to remove the oak without breaking down the tank, so we didnt put any bolts along the bottom. Not a big deal on the front, but that meant there was no where to put bolts on the sides. Here's how we solved that problem.



It's just an extra piece of wood that we used to bolt to. The holes in the pine were overdrilled so that the bolts can slide back and forth... however they were left tight in the oak. This allows the oak to float as needed for swelling or shrinking. I also broke down the stand and canopy to prep for painting and staining. hopefully that begins tonight.




__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 05/22/2007, 07:27 AM   #109
jwinn
Registered Member
 
Join Date: Dec 2005
Posts: 53
nice


jwinn is offline   Reply With Quote
Unread 05/24/2007, 04:21 PM   #110
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
And painted. I used sherwin williams water based primer and paint, one coat of each with some caulk in between. I think that'll do.



Staining should commence in the near term.


__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 05/29/2007, 02:57 PM   #111
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
Stain complete. Next comes polyurethane.








__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 06/02/2007, 08:04 PM   #112
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
The stand is done. The canopy needs a little more poly, but it shouldnt take too long. Here are a couple shots.








__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 06/05/2007, 06:55 PM   #113
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
I mounted some lights, for anyone who's reading along with me (I think I can hear some crickets!). Here's an image.



The lights are a little more than 6" off the water, and I think this will work well. I have eight 54w overdriven T5 bulbs. Anyone have other thoughts?

Also, for those that don't want to paint their tanks. I called a local sign store and ordered a full sheet of black coroplast ($18 for a 4'x8' sheet, so cheaper for smaller I imagine). It's a 4mm thick honeycombed plastic material, that, oddly enough, is used for signs. I plan on velcroing it to the tank behind the overflows, and this way I can remove it if ever I want to (or switch the color). The big perk of this is that my tank is in a corner of sorts, so having this stiff material should make it easier to reapply if need be. You can see I've got it on the tank in this picture.


__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 06/06/2007, 08:18 AM   #114
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
I also spent a little time fitting the sump and messing with electrical. The sump fits in fine, with plenty of space. It slides in the side openings, so I'll be able to remove it for big cleaning/maintenance ops down the road.



And then the electrical. Half of it will be on GFCI (the blue box) for lights, heaters, etc, and the other half will be on straight power (the DJ switch boxes) for pumps and other relatively benign hardware. I wanted to isolate the GFCI stuff from the pumps just in case it tripped, it wouldnt kill all my water flow. This will all be run on a single 20A circuit, but all my hardware adds up to a max of 14A (and thats with the heaters on at the same time as the lights, which isnt really credible here in Houston... max running amperage will likely be under 12A).




__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 06/06/2007, 09:15 PM   #115
conefree
Gene Pool Lifeguard
 
conefree's Avatar
 
Join Date: Jan 2004
Location: Downingtown, PA
Posts: 758
Just found your thread. Looking great, keep up the good work and updates.


__________________
Chris

"A Closed Mouth Gathers No Foot" - Unknown

Some people are like Slinkies . . . not really good for anything, but you still can't help but smile when you see one tumble down the stairs.

Current Tank Info: 120 gallon, Ecosystem 3612, 6X54 TEK light, Tunze Osmolator, Lifereef dual overflow all down
conefree is offline   Reply With Quote
Unread 06/07/2007, 07:45 AM   #116
Sink Colin Sink
Registered Member
 
Join Date: Dec 2006
Location: Roanoke, VA
Posts: 74
I just found this too. I'll be tagging along!

Everything looks realllly good by the way.


Sink Colin Sink is offline   Reply With Quote
Unread 06/07/2007, 09:42 AM   #117
Pbrown3701
Registered Member
 
Pbrown3701's Avatar
 
Join Date: May 2006
Location: Stillwater, OK
Posts: 1,407
Sorry for the seeming lack of interest....I've been traveling like a mad man.

It's looking really good. When do you think you'll begin water testing?


Pbrown3701 is offline   Reply With Quote
Unread 06/07/2007, 11:05 AM   #118
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
Quote:
Originally posted by Pbrown3701
It's looking really good. When do you think you'll begin water testing?
Define "water test". Do you mean, "when are you going to put it in place, fill it with water, and just assume it doesnt leak"? Next week sometime.

I wouldnt think they'd let madmen travel, but you probably know better than I. Did you get out of the country?


__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 06/07/2007, 11:20 AM   #119
Pbrown3701
Registered Member
 
Pbrown3701's Avatar
 
Join Date: May 2006
Location: Stillwater, OK
Posts: 1,407
Well...not this most recent slew of trips (unless you count Canada out of the country - i know I don't since we own them). All domestic travel for the last 5 straight weeks except for a 1 week stay over in Vancouver.

I typically travel overseas for work about once every couple of months.


Pbrown3701 is offline   Reply With Quote
Unread 06/07/2007, 02:39 PM   #120
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
Quote:
Originally posted by conefree
Just found your thread. Looking great, keep up the good work and updates.
Quote:
Originally posted by Sink Colin Sink
I just found this too. I'll be tagging along!

Everything looks realllly good by the way.
Thanks! Glad to have you along, hopefully you'll be entertained.


__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 06/07/2007, 06:58 PM   #121
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
I finished the canopy. I feel it came out quite well.




__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Unread 06/07/2007, 07:09 PM   #122
Sink Colin Sink
Registered Member
 
Join Date: Dec 2006
Location: Roanoke, VA
Posts: 74
I like it! Looks good.




Sink Colin Sink is offline   Reply With Quote
Unread 06/08/2007, 07:38 AM   #123
Pbrown3701
Registered Member
 
Pbrown3701's Avatar
 
Join Date: May 2006
Location: Stillwater, OK
Posts: 1,407
Wow bud, looks great!

btw, nice wheels


Pbrown3701 is offline   Reply With Quote
Unread 06/08/2007, 07:38 AM   #124
Pbrown3701
Registered Member
 
Pbrown3701's Avatar
 
Join Date: May 2006
Location: Stillwater, OK
Posts: 1,407
...out of curiosity, how much does it weight with all of that Oak?


Pbrown3701 is offline   Reply With Quote
Unread 06/08/2007, 10:11 AM   #125
crvz
Team RC Member
 
crvz's Avatar
 
Join Date: Jul 2005
Location: houstonia
Posts: 7,989
Quote:
Originally posted by Pbrown3701
...out of curiosity, how much does it weight with all of that Oak?
Well, I was able to put the canopy up on the tank by myself, but it was pretty stupid to do so. I'd probably put it in the 60-70lb range, but that may be excessive. I'm not that strong.

The stand is a 2 person move, though. Probably around 150 lbs or so.


__________________
-Chris-

You don't win friends with salad.

"Look! They're trying to learn for free!" ... "Use your phony guns as clubs!"

Current Tank Info: rectangluar? wet?
crvz is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -6. The time now is 04:17 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.