![]() |
![]() |
![]() |
#1 |
Registered Member
Join Date: Jun 2006
Location: PALM HARBOR, FLORIDA
Posts: 22
|
Penductor question
I just received & installed the 1" penductors on my closed loop and it seems as the flow has decreased. The loop is a Dart pump with a OM 4 way. I did have Loc-Line ends before and I could literally create a vortex in the tank. my understanding of the Penductors was that the flow was more turbulent. The Loc-Line ends were to much of a jet imo. does anybody Know of any mods for these, has anyone tried drilling the hole at the output larger. Thanks
__________________
AL Current Tank Info: 400G REEF |
![]() |
![]() |
![]() |
#2 |
Moved On
Join Date: Jul 2007
Location: Pittsburgh, Pa
Posts: 792
|
The Dart is a high flow pump, right? You need a pressure pump, like a Iwaki.
|
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Mar 2007
Location: San Diego, CA
Posts: 94
|
I had the same problem, when I tried using PCI flow accelerators on my om squirt. I'm guessing that eductors/penductors rely on pressure and the OM takes a lot of that away. I tried them without an OM, and I saw a difference.
|
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Oct 2003
Posts: 827
|
a dart is only going to be able to MAYBE run one penductor well, definitely not two, and definitely not if it is working against a lot of other head pressure induced by your OM 4 way
__________________
DRILL IT!!! Current Tank Info: In charge of over 50,000 gallons of fish only tanks |
![]() |
![]() |
![]() |
|
|